CADB/T-HE ECOWATT Series
Configurable and airtight supply and exhaust spigots, suitable for horizontal installation.
Commercial premises, offices, restaurants, public buildings, schools.
CADB/T-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB/T-HE DC ECOWATT
Heat recovery units with built-in low pressure hot water coil.
CADB/T-HE DI ECOWATT
Heat recovery units with built-in electric heater battery.
The 3-Way valve is provided as an accessory (see accessories table for this series)
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F.
Plug-fan with backward curved impeller.
All fans installed in CADB/T- HE ECOWATT models, comply with the efficiency requirements of the ErP Directive.
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
Single phase (CADB-HE) and three phase models (CADT-HE).
Airflows from 400 to 5400 m3/h at 150 Pa of static pressure available.All versions and models include by-pass. Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
Low noise level and robust construction
Casing with double skinned 25 mm panels with thermoacoustic flameproof insulation M0, with high-quality finish and plastic corners.
behind and after filters, to control their cleaning.
Incorporating Plug-fans with EC single-phase motor.
All versions include internal bypass (approximately 75% airflow).
Counterflow heat exchanger
high-efficiency (up to 93%), EUROVENT certified.
-F7 Filters: Low pressure F7 filters for supply air.
-M5 Filters: M5 filters for extract air.
Possibility of mounting a second filter (accessory)
Specific supports to allow installation in false ceilings via threaded rods.