• Home
  • Global Directory
  • Contact
  • Official S&P Youtube channel
  • Official S&P Flickr Photostream
  • Share:
    Configurable Cross-Flow heat recovery units
    CADB/T-N PRO-REG Series

    CADB/T-N PRO REG

    Compact heat recovery unit with cross-flow heat exchanger in 7 sizes from 470 m3/h to 8.160 m3/h. The casing is made from aluminium profile frame with double skinned 25 mm steel panels with mineral wool insulation. It is for indoor installations and designed to be as compact as possible for false ceiling applications.
    The casings incorporate top, bottom and side access panels for maintenance. The outside skin is from PVC coated steel and the inner skin is pre-galvanised steel. The units are available in horizontal and vertical versions.

    CADB/T-N D PRO-REG
    Heat recovery units without additional incorporated heater.

    CADB/T-N DI PRO-REG
    Heat recovery units with built-in electric heater.

    CADB/T-N DC PRO-REG
    Heat recovery units with built-in hot water coil.

    Motors
    Models 05 to 30: EC motors with integrated electronic protection, IP44, Class B.
    Models 45 to 80: Three phase motors, IP55, Class F.

    Fans
    ?Plug-fan with backward curved blades. All fans installed in CADB/T-N PRO-REG models, comply with the efficiency requirements of the ErP Directive.

    Control
    ?It includes manual or automatic control for modes: adjustable airflow (VAV), constant pressure (COP) or constant airflow (CAV), via CO2, pressure or caudar sensors (accessories).
    Post-heating stage versions (-DI/-DC) allow post-heating management depending on the temperatures taken by the temperature probes incorporated in the design.
    Ranges of product according to the type of operating control:

    VAV- variable air volume
    Fan speed can be adjusted with a 0 - 10V signal from the remote touchscreen panel (included) or an external CO2, temperature or humidity sensor (accessories).
    CAV - constant air volume
    Manual pre-setting of 2 working points the fans are controlled separately. It is necessary to add a pressure sensor TDP-D as an external accessory.
    COP - constant pressure
    Constant pressure measured by an external pressure sensor TDP-D (accessory). It is necessary to add a pressure sensor TDP-D as an external accessory.

    Filters
    F7: Low pressure F7 filters for supply and extract air.

    Additional information
    Single phase (CADB-N) and three phase models (CADT-N). Horizontal and vertical version with by-pass available.
    Highest mounting flexibility given by the interchangeable side panels.
    CADB/T-N PRO REG

    FILTERS

    HORIZONTAL CONFIGURATION

    VERTICAL CONFIGURATION

    WITHOUT ADDITIONAL WARMTH

    ELECTRIC BATTERY INCLUDED

    WATER COIL INCLUDED

    Heat recovery units

    AVAILABLE IN AUGMENTED REALITY

    Instructions