Fan casing manufactured from heavy gauge galvanised sheet steel internally lined with 25mm thickness fireproof fibreglass acoustic insulation (M0).
All models incorporate separate high grade diecast aluminium blades locked within a pressed sheet steel hub.
Available, depending upon the model:
- with three phase motors in 4 or 6 poles.
- with three phase two speed motors 4/8 or 6/12 poles.
F400-120 and F300-120 motors are IP55 class H insulation.
Three phase 400V-50Hz, for higher power motors and two speed motors.
(See characteristics chart).
Standard air direction: form (A) configuration (Motor over Impeller).
Officially approved to EN12101-3 standard (certificate number 0370-CPD-0420)
Officially approved to EN12101-3 standard (certificate number 0370-CPD-0955)
Highly versatile range due to different number of available blades and adjustable pitch angles
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of installation requirements.
Motor approved S1 and S2
F400-120 or F300-120 certified motors approved for running continuously (S1) or for emergency operation (S2).
Casings manufactured from galvanised sheet steel.
Design enables the casing side panels to be removed and the motorimpeller assembly accessed.
Easy to install
Robust base supports facilitate the installation.
(Models from 900 to 1250)
Impeller dynamically balanced
Impeller dynamically balanced, according to ISO 1940 standard, providing vibration free operation.
Wide blade design: higher pressure
Wide blade design to ensure the highest efficient airflow performances.
Configuration 1: models from 400 to 630 (F400) or 800/6 (F300).
Configuration 2: models from 710 (F400) or 800/9 (F300) to 1250.