Counter-flow, high-efficiency heat recovery unit
CAD ECOWATT

Multi dwelling blocks

Single dwellings

Heat recovery unit

AVAILABLE IN AUGMENTED REALITY

Plug & Play whole house heat recovery unit with a high-efficiency aluminium heat exchanger up to 92% and low consumption EC motors.
The casing is made of 25mm thick, self-supporting double skinned mineral wool isolated panels. The outer and the inner skin are white coated RAL 9003.
Easy access to all components via the front door. Ensures a constant supply of fresh air and the exhausting of the waste air.
To optimise energy consumption at the same time as air quality, a proportional sensor can be connected (C02, Humidity).
It includes a 100% by-pass, which allows free cooling during the summertime.
To ensure a good air quality, the unit is equipped with a M5 filter at the inlet and a M5 filter at the outlet to protect the heat exchanger. It is possible to fit an additional F7 post-filter (accessory).

Features
-M5 filters on the fresh air and the exhaust air sides to guarantee clean air and to protect the heat exchanger.
-F7 filter can be installed optionally.
-White coated galvanized steel casing of 25mm thick.
-Self-supporting double skin acoustically and thermally insulated panels.
-High-effcient backward curved centrifugal impellers (Bmax) with low consumption EC motors, single phase 230V, 50/60Hz.
-High-efficient aluminium counterflow heat exchanger.
-Nozzles Ø160mm.
-100% automatic or manual by-pass.
-Remote control via cable.
-3 speeds selection.
-Standby mode.
Model Short Description
+ CAD HE 325 EC V BASIC Counter-flow, high-efficiency heat recovery unit
CAD ECOWATT
+ CAD HE 450 EC V BASIC Counter-flow, high-efficiency heat recovery unit
CAD ECOWATT