Centrifugal roof mounted fans
MAX-TEMP CTVB / CTVT Series - Vertical discharge

MAX-TEMP CTVB/CTVT

> Download images
  • <strong>Approved to EN12101-3 standard Certificate nº 0370-CPD-0347</strong>

    Approved to EN12101-3 standard Certificate nº 0370-CPD-0347

  • <strong>Continous operation</strong>

    Continous operation

  • <strong>Car Parks</strong>

    Car Parks

  • <strong>Industrial and commercial kitchens</strong>

    Industrial and commercial kitchens

  • <strong>Continuous</strong>

    Continuous

  • <strong>Smoke extract</strong>

    Smoke extract

  • Print this page
  • Download the catalog series in pdf

MAX-TEMP CTVB/CTVT

Range of centrifugal roof mounted fans in vertical discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models

Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.

* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.

Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.

Attributes

  • MAX-TEMP CTVB/CTVTbdp506

    Cooling duct
    Enables the motor cooling when the fan is extracting air at an extremely high temperature.

  • MAX-TEMP CTVB/CTVTbdp487

    Easy to install
    Supports easing the installation on the roof.

  • MAX-TEMP CTVB/CTVTbdp481

    Self cooling system
    Special design in order to cool the motor and to extend the life of the assembly.

  • MAX-TEMP CTVB/CTVTbdp531

    Backward curved centrifugal impellers
    To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet. Models from 450 to 630 in sheet steel protected against corrosion by cataforesis primer and black polyester paint finish.

  • MAX-TEMP CTVB/CTVTbdp501

    Bird-proof guard

Downloads
  • pdf_ins1 Ins_MAX-TEMP 2.41Mb
  • Product Datasheet EN_MAXTEMP-N 7.06Mb

S&P by your side

For us, customer service is as important as the quality of your products.

We help you in your purchase

Request quotes, know the status of an order and other general information.

s&p by your side