Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
Acoustic cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with 50 mm thickness of fireproof acoustic insulation (M0). Fan cover supplied with “quick-fix” fixings to enable fast removal and fitting, and a tight close. All models incorporate single phase direct-drive forward curved centrifugal fan. All fans installed in acoustic cabinet fans CAB comply with the efficiency requirements of the ErP Directive.
All cabinets can be installed outdoors as standard.
Available, depending upon the model, with single motors in 2 or 4 poles.
Motors
- From CAB-100 to to CAB-250N, motors are IP44, class B with ball bearings and thermal protection.
- CAB-315 RE model is fitted with an IP44 class F motor with ball bearings and thermal protection.
- CAB-355 RE and 400 RE models are fitted with an IP55 class F motor with ball bearings and thermal protection.
Electrical supply:
Single-phase 230V 50/60Hz from CAB-100 to 160
Single-phase 230V 50Hz from CAB-200 to 400 RE
Speed controllable using voltage regulation.
Working temperature from -20ºC to +40ºC.
All cabinets can be installed outdoors as standard.
Available, depending upon the model, with single motors in 2 or 4 poles.
Motors
- From CAB-100 to to CAB-250N, motors are IP44, class B with ball bearings and thermal protection.
- CAB-315 RE model is fitted with an IP44 class F motor with ball bearings and thermal protection.
- CAB-355 RE and 400 RE models are fitted with an IP55 class F motor with ball bearings and thermal protection.
Electrical supply:
Single-phase 230V 50/60Hz from CAB-100 to 160
Single-phase 230V 50Hz from CAB-200 to 400 RE
Speed controllable using voltage regulation.
Working temperature from -20ºC to +40ºC.
-
Low noise level
Acoustic insulation of 50 mm thickness fireproof fibreglass (M0) with a high resistance coating reducing the noise level significantly. -
Cabinet air tightness
All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. -
IP55
remote terminal box
To ease installation and connection to external controls. -
Easy maintenance
“Quick fix” fixings to enable a fast and easy maintenance. -
Easy to install
All models are supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation. -
Installation in any position
Can be mounted in vertical, horizontal or inverted position.
