Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Hair Dryers
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
Range of direct drive backward curved centrifugal cabinet fans designed for ventilation of commercial kitchens and industrial applications.
Cabinet fan manufactured from aluminium profiles and double thickness side panels internally lined with 25 mm thickness of fireproof fiberglass acoustic insulation.
Circular duct connection flange on the inlet and outlet. CVAB-N/CVAT-N incorporates direct drive backward curved centrifugal impeller,manufactured from aluminium (CVAB-N) or steel (CVAT-N) sheet, with motor fitted inside the air stream.
Motors
CVAB-N
Single-phase external rotor motors 230V 50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Working temperature from -40ºC to 60ºC.
CVAT-N
Three-phase 4 and 6 pole motors 230/400V 50Hz, IP55, class F, with thermal protection (PTC), speed controllable by inverter.
Working temperature from -20ºC to 40ºC.
Cabinet fan manufactured from aluminium profiles and double thickness side panels internally lined with 25 mm thickness of fireproof fiberglass acoustic insulation.
Circular duct connection flange on the inlet and outlet. CVAB-N/CVAT-N incorporates direct drive backward curved centrifugal impeller,manufactured from aluminium (CVAB-N) or steel (CVAT-N) sheet, with motor fitted inside the air stream.
Motors
CVAB-N
Single-phase external rotor motors 230V 50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Working temperature from -40ºC to 60ºC.
CVAT-N
Three-phase 4 and 6 pole motors 230/400V 50Hz, IP55, class F, with thermal protection (PTC), speed controllable by inverter.
Working temperature from -20ºC to 40ºC.
On request, explosion proof versions in accordance to ATEX Directive, for three phase models.
Working temperature from -20ºC to +40ºC.
Note electrical data may vary for ATEX motors.
Working temperature from -20ºC to +40ºC.
- ATEX Flameproof - Gas:
In standard ATEX version flameproof motors are without thermal protection.
If used with frequency inverter,flameproof motors with a PTC-type thermal protection must be specified at order.
II 2G Exd IIB T4 II 2G Exd IIB+H2 T4 (with motor Exd IIC T4) - ATEX Increased safety - Gas:
II 2G Exe IIC T3
Note electrical data may vary for ATEX motors.
-
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced. -
Low noise level
On request, double thickness side panels lined with 25 thickness of fireproof fiberglass acoustic insulation. -
Robustness
Quality finished aluminium profiles and plastic corners providing a great robustness. -
IP55 external terminal box
To facilitate electric connection. -
