Single inlet centrifugal fans
Approved to EN12101-3 standard
Industrial and commercial kitchens
Sizes of this series are in accordance with AMCA standard 99-0098-76 and DIN323R20.
Each fan type has its maximum operating speed and power due to its mechanical design. The operating limit of BSP series is adjusted to meet the requirement of class I limit as defined in AMCA standard 99-2408-69.
Foot-mounted motor (B3), IP55, Class F insulation.
(*Check Easyvent for 60Hz available models).
T hree phase 380-415V-50Hz, for higher power motors and two speed motors.
The wheel of BSP series has backward curved blades manufactured in cold rolled sheet steel with polyester powder coating finish.
For all sizes, the housing is manufactured in galvanized sheet steel with the housing fixed to the side plates in "pittsburg lock" form system.
The frame is manufactured with galvanized angular bars for type "C".
For type "T", they are manufactured with sections of steel and finished with polyester powder coating.
-Type C (models from 315 to 630)
- Type T (models from 710 to 1000).
Inspection door (IP) and drain hole (CD).
2 speed motors.
On request, explosion proof versions for BSP, in accordance with ATEX Directive for three phase models:
- ATEX Flameproof - Gas
II 2G Ex d IIB T4
II 2G Ex d IIB(H2) T4 (with Ex d IIC T4 motor)
- ATEX Increased safety - Gas
II 2G Ex e II T3
- ATEX - Dust
Suspended flammable particles and non-conductive dust:
II 3D Ex tc IIIB T125ºC
II 3D Ex tc IIIC T125ºC (with IP65 motor)
Assembly type C
Assembly type T
S&P by your side
For us, customer service is as important as the quality of your products.
We help you in your purchase
Request quotes, know the status of an order and other general information.