Short casing versions:
Soler&Palau Sistemas de Ventilación SLU certifies that this model is licensed to bear the AMCA Seal for Air Performance. The revision version is EasyVent v11, May 2020. Certification may be checked at AMCA
Refer to EasyVent to select the most suitable configurations for the installation, and obtain the corresponding datasheets.
Motors
Available, depending upon the model:
- with three phase motors in 2, 4 or 6 poles.
- with three phase two speed motors 2/4,4/8, 4/6 or 6/12 poles.
All the motors are IP55, Class F insulation
Electrical supplies:
TThree phase 380-415V-50Hz, for higher power motors and two speed motors.
(*Check Easyvent for 60Hz available models)
On request
Casing in stainless steel or paint finish.
Motors provided with PTC thermistor or space heaters.
-
Corrosion resistance
Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish. -
Support motor
Manufactured from sheet steel with a corrosion resistant hot dip galvanised or Magnelis finish. (Models from 400 to 800). -
Aerodynamic motor support
Aerodynamic design of the motor support to optimise airflow performances. (Models from 900 to 1250). -
Motor support (1400 and 1600 mm diameter):
Welded on the fan casing. The whole assembly with a corrosion resistant hot dip galvanised finish. -
Impeller dynamically balanced
according to ISO 1940 standard, providing vibration free operation. -
Wide blade design: higher pressure
Blade design to ensure the highest efficient airflow performances.
Configuration 1: 400 to 800/6 models.
Configuration 2: 800/9 to 1600 models. -
Terminal box
External terminal box, situated out of the airflow (long casing standard versions).