Exhaust and/or supply valves: accessories
Range of Exhaust and/or supply valves: accessories
In our catalogue of assembly accessories, you will find a wide variety of accessories for extraction and impulsion valves, which will allow you to complement your assembly and achieve the maximum performance of your installation.
Among the different accessories for extraction and impulsion valves that you will find in our catalogue are: self-adjusting flow regulators, motorised double flow dampers, flow straighteners or motorised dampers for in-line centrifugal fans.
Discover all our accessories for extraction and impulsion valves and complete your ventilation systems.
RDR, self-regulating flow regulators
Self-adjusting, adjustable flow regulators of the RDR range are installed inside the duct to achieve a constant flow in a pressure range between 50 and 200 Pa. These self-regulating flow regulators are used in commercial installations (tertiary) as well as in air treatment (max. 60ºC), in extraction or supply air. The self-adjusting flow regulators in the RDR range are made of M1 fire rated plastic, with a temperature limit of 60°C and ensure watertightness thanks to a foam gasket.
REEV, motorisable manually operated dampers
The motorized manual dampers of the REEV range, allow the balancing of networks and the watertight closing of branches or air intakes. The REEV range of motorized manual dampers has a galvanized steel body and damper, cadmium-plated shaft and bronze bearing. The REEV motor-operated manual dampers have a sealing gasket on both sides and on the perimeter of the damper, as well as a manual control or with a servomotor support.
IRIS, diaphragm flow regulators
The IRIS series diaphragm flow regulators are designed for circular ducts and allow precise flow regulation by pressure measurement. They also allow manual adjustment and control operations to be carried out from outside the duct.
MPC, flow straighteners
The range of MPC flow straighteners are designed to correctly measure the suction pressures of TD Series units without being affected by unwanted flows.
IJK, damper supplied with standard rectangular flanges
The IJK series is supplied with standard rectangular flanges and it is manufactured from galvanised sheet steel. Fitted as standard with removable handle.