HIGH-EFFICIENCY HEAT RECOVERY UNITS
CAD-COMPACT Series

CAD COMPACT

> Download images

CAD COMPACT

  • Heat recovery

    Heat recovery

  • CAD-COMPACTbdp547
  • CAD-COMPACTbdp483
  • CAD-COMPACTbdp508
  • INPUT FILTER

    INPUT FILTER

  • EXTRACTION FILTER

    EXTRACTION FILTER

  • HORIZONTAL CONFIGURATION

    HORIZONTAL CONFIGURATION

  • WITH NO ADDITIONAL HEAT INPUT

    WITH NO ADDITIONAL HEAT INPUT

  • Print this page
  • Download the catalog series in pdf

CAD COMPACT

Heat recovery units with high-efficiency counterflow aluminium plate heat exchanger (up to 88%) certified by Eurovent, mounted in a galvanised steel double-walled enclosure with internal thermo-acoustic fireproof insulation (A1/M0) made of 25 mm thick mineral wool in models 500 to 2500, and 30 mm in models 3200 and 4500.
Circular inlet and outlet flanges with seals in models 500 to 1800, and rectangular flanges in models 2500 to 4500. Only available in horizontal version.
Minimum outside air temperature -10ºC.
For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

ApplicationsAir renewal in commercial premises, offices, hotels, public buildings, schools.
The CAD-COMPACT range is not available with additional post-heating batteries integrated in the unit, although it is possible to add them as accessories.

FansPlug fans with reverse impeller blades.
Single-phase EC motors with integrated electronic protection. IP44, Class B.

Filters-F7: Low pressure F7 filters (ePM1, 70%) for air supply.
- M5: M5 filters (ePM10, 50%) for air extraction.
- It is possible to mount a second filter inside the system (supplied as an accessory).

Control
CAD-COMPACT units can be supplied with 3 levels of control functioning:
ECOWATT VERSION
BASIC and ADVANCED VERSION

See detailed characteristics of both controls in the table about Plug&Play versions functionalities.

Other data
Single-phase electrical supply 230V 50-60Hz in models 500 to 3200, three-phase 400V 50-60Hz in model 4500.
Nominal airflow of 460 to 4.165 m³/h with 150Pa of available pressure.
All models and versions include internal bypass.

Attributes

  • CAD-COMPACTbdp506

    BASIC version
    Characteristics:
    - Remote control included.
    - Manual/automatic speed control.
    - Manual and automatic bypass control.
    - Alarm indication.
    - Modbus communication.

  • CAD-COMPACTbdp487

    ADVANCED version
    Characteristics:
    - Touch control screen.
    - Same functions as BASIC version plus fan control in VAV, COP and CAV modes.
    - Control of external water coils (accessories).
    - Additional functions.

  • CAD-COMPACTbdp481

    Electrical box included
    External security switch included. Both in the pre-wired ECOWATT version and in the BASIC and ADVANCED Plug&Play versions.

  • CAD-COMPACTbdp531

    Low noise level and robust construction
    Twin panel enclosure. Fireproof thermo-acoustic insulation A1/M0 of 25 or 30 mm thickness, depending on the model.

  • CAD-COMPACTbdp501

    Highly efficient heat exchanger made of aluminium (up to 86%) certified by Eurovent.

  • CAD-COMPACTbdp496

    Motors
    Plug fans are equipped with single-phase EC motors.

  • CAD-COMPACTbdp549

    High-efficiency filters
    - Low pressure F7 filters (ePM1, 70%) for air supply.
    - M5 filters (ePM10 50%) in the extraction.
    Possibility of mounting a second filter inside the unit (supplied as an accessory).

  • CAD-COMPACTbdp540

    Bypass
    All versions include internal bypass with an integrated actuator.

  • CAD-COMPACTbdp495

    Easy assembly
    Specific supports for installation in false ceilings.

Downloads
  • Instructions Manual Ins_CAD-COMPACT_ECOWATT_en 2.14Mb
  • Catalogue series in pdf EN_CAD-COMPACT 5.75Mb

S&P by your side

For us, customer service is as important as the quality of your products.

We help you in your purchase

Request quotes, know the status of an order and other general information.

s&p by your side