HIGH-EFFICIENCY HEAT RECOVERY UNITS CONFIGURABLE FOR USE WITHOUT COILS
CADB/T-HE BASIC Series

CADB/T-HE BASIC

> Download images

CADB/T-HE BASIC

  • HEAT RECOVERY

    HEAT RECOVERY

  • CADB/T-HE_BASICbdp547
  • CADB/T-HE_BASICbdp483
  • CADB/T-HE_BASICbdp508
  • INPUT FILTER

    INPUT FILTER

  • EXTRACTION FILTER

    EXTRACTION FILTER

  • HORIZONTAL INSTALLATION

    HORIZONTAL INSTALLATION

  • VERTICAL INSTALLATION

    VERTICAL INSTALLATION

  • WITH NO ADDITIONAL HEAT INPUT

    WITH NO ADDITIONAL HEAT INPUT

  • Print this page
  • Download the catalog series in pdf

CADB/T-HE BASIC

Heat recovery units with high-efficiency counterflow plate heat exchanger (up to 93%), certified by Eurovent, mounted in a galvanised steel double-walled enclosure with internal thermo-acoustic insulation (A1/M0) made of 25mm thick mineral wool in models 04 to 33 and 47mm in models 45 to 100.
Adjustable input and output ports, versions for horizontal and vertical installation.
Minimum outside air temperature -10ºC.
For lower temperatures it is necessary to use preheating coils located in the external air inlet.


Applications
Commercial premises, offices, hospitality venues, public buildings, schools.

The CADB/T-HE-D BASIC range is not available with additional post-heating coils.
The BASIC control does not support the control of external heating or cooling coils.
Without additional heating input.


Motors
Models 04 to 33: Single-phase EC motors with integrated electronic protection. IP44, Type B.
Models 45 to 100: EC motors with three-phase supply, with integrated electronic protection, IP54, Class B.


Fans
Plug fans with reverse impeller blades.


Filters
- F7: Low-loss F7 filters (ePM1 70%) for air supply.
- M5: M5 filters (ePM10 50%) for air extraction.
- It is possible to install a second filter inside the system (supplied as an accessory).


Control
It includes an integral operation control, located inside the unit and wired to all the components (fans, bypass, filter clogging detectors, temperature probes, etc.).
It allows manual or automatic fan control.

It allows two possible automatic fan control modes:
VAV- Variable Air Volume: Fan speed can be adjusted using a 0 - 10V analogue signal from the remote touchscreen panel (included) or an external CO2 sensor (accessories).

COP - Constant Pressure (only available via Modbus): The fan speed is regulated to maintain a constant pressure in the duct network.
A TDP-D pressure sensor is necessary (accessory).
This function cannot be activated with the remote control supplied with the unit.


Other Data
Single-phase (CADB-HE BASIC) and three-phase (CADT-HE BASIC) models.
Nominal flow rates from 450 to 10,000 m3/h. All models and versions include internal bypass.
Interchangeable side panels allowing multiple orientations of air inlets and outlets.

Attributes

  • CADB/T-HE_BASICbdp506

    Remote control
    Included with the product

  • CADB/T-HE_BASICbdp487

    Safety Switch
    All versions include an emergency stop switch

Downloads
  • Instructions Manual Ins_CADB-T-HE_BASIC_en 5.87Mb
  • Catalogue series in pdf EN_CADB-T-HE-BASIC 9.39Mb

S&P by your side

For us, customer service is as important as the quality of your products.

We help you in your purchase

Request quotes, know the status of an order and other general information.

s&p by your side