SABIK
-
-
-
-
Heat recovery
-
Heat recovery
-
Domestic MVHR
Single dwellings -
Domestic MVHR
Multi dwelling blocks -
-
LOW PROFILE
-
DESIGNED FOR AN EASY INSTALLATION
Range of domestic MVHR units with high efficiency counterflow heat exchanger (up to 92%) and low consumption EC motors.
The units assure a continuous and balanced ventilation system, extracting moist stale air from the wet rooms and at the same time introducing a tempered and filtered fresh air to the habitable rooms.
The optimized design allows compliance with the highest standards assuring a very low leakage level, high thermal insulation and a minimal sound level.
The integrated humidity sensor allows an automatic function tracking the indoor humidity and proportionally adjusting the fans speed.
The unit contains as a standard iso coarse 65% (G4) filters in the supply and extract airflows to clean the incoming air and protect the heat exchanger.
For higher air quality an optional Pm1 70% (F7) filter can be installed in the supply air channel.
An integrated 100% bypass is activated either automatically or manually.
The bypass is particularly useful when the indoors temperature is higher than outdoors and free cooling is preferable.
INSTALLATION FRIENDLY
A versatile product with advantages for installation.
The airflow direction paths can be handed to allow for alternate on-site configurations of duct routing.
A range of accessories lets the end user tailor the functions of the system to their specific requirements.
Characteristics:
- High efficieny counterflow heat exchanger
- Low consumption EC motors
- Minimal sound level
- Automatic/manual bypass
- Install friendly
- User friendly
- Customisable
Optional accessories:
- Integrable pre heater
- Integrable VOC sensor
- Communication module
- Integrable constant airflow module (Servoflow)
The units assure a continuous and balanced ventilation system, extracting moist stale air from the wet rooms and at the same time introducing a tempered and filtered fresh air to the habitable rooms.
The optimized design allows compliance with the highest standards assuring a very low leakage level, high thermal insulation and a minimal sound level.
The integrated humidity sensor allows an automatic function tracking the indoor humidity and proportionally adjusting the fans speed.
The unit contains as a standard iso coarse 65% (G4) filters in the supply and extract airflows to clean the incoming air and protect the heat exchanger.
For higher air quality an optional Pm1 70% (F7) filter can be installed in the supply air channel.
An integrated 100% bypass is activated either automatically or manually.
The bypass is particularly useful when the indoors temperature is higher than outdoors and free cooling is preferable.
INSTALLATION FRIENDLY
A versatile product with advantages for installation.
The airflow direction paths can be handed to allow for alternate on-site configurations of duct routing.
A range of accessories lets the end user tailor the functions of the system to their specific requirements.
Characteristics:
- High efficieny counterflow heat exchanger
- Low consumption EC motors
- Minimal sound level
- Automatic/manual bypass
- Install friendly
- User friendly
- Customisable
Optional accessories:
- Integrable pre heater
- Integrable VOC sensor
- Communication module
- Integrable constant airflow module (Servoflow)
-
Touch screen
Remote (wired) touch screen display panel.
Fuctions: easy control, speed settings, manual bypass, boost activation, automatic mode activation and dirty filter alarm. -
Connectair
Through the optional SPCM module, the unit can access Connectair, S&P's IoT that provides access to a new way to enjoy your ventilation. -
Installer friendly
Simple access to all the components.