Roof Mounted Axial Flow Fans
HGHT-V Series

> Download images

Serial HGHT-V

HGHT-V/4-1000-6-F400-50Hz

  • <strong>Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0909</strong>

    Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0909

  • <strong>Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0923</strong>

    Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0923

  • <strong>Car Parks</strong>

    Car Parks

HGHT-V/4-1000-6-F400-50Hz

Range of roof mounted axial flow fans, with vertical air discharge configuration, for air extract.
Designed for smoke extraction in fi re conditions and certified F400-120 and F300-120 (HGHT-V - CE marked).
Casing formed from rolled sheet steel welded on the base with a corrosion resistant hot dipped galvanized finish. High grade die-cast aluminum blades locked within a pressed sheet steel hub. Backdraft shutter and proof guard at the fan discharge. Cylindrical casing formed from rolled sheet steel protected against corrosion by grey polyester paint coating.

Motors
- HGHT-V F400-120: three-phase 4 pole motors 400V-50Hz, IP55, class H insulation.
- HGHT-V: F300-120: three-phase 4 pole motors 400V-50Hz, IP55, class H insulation.
- Electrical isolator fitted to fan casing.
Three phase 230/400V-50Hz up to 3 kW.
Three phase 400V-50Hz, for higher power motors and two speed motors.
(See characteristics chart).

Additional Information
Standard air direction: form (A)configuration (Motor over impeller).

On request
- 6 pole motors.
- 2 speed motors 4/6 and 4/8 poles.

Technical data

Curves

S&P by your side

For us, customer service is as important as the quality of your products.

We help you in your purchase

Request quotes, know the status of an order and other general information.

s&p by your side