FORWARD CURVED IMPELLER FOR MATERIAL TRANSPORT - DIRECT DRIVE
KA-P

KA-P

> Download images

KA-P

View complete information
  • 61-KA-Pbdp532
  • Print this page
  • Download the catalog series in pdf

KA-P

Direct drive, single inlet centrifugal fan. Manufactured from steel sheet protected with cataforesis primer + epoxy paint finish. Designed to continuously circulate air from -20ºC up to 60ºC.

Motors
2 or 4 pole, IE 3* high efficiency, three-phase 230/400V 50Hz up to motor size 132 and 400/690V 50Hz for higher motors. IP55, Class F protection.
* From 0,75kW, motor can be IE 2 and controlled by VSD.

On request
• Manufactured from different materials.
• 2-speed motors.
• 60 Hz versions.
• Painted in different RAL colour.
• Fan with no supporting stand (Motor-Flange, Arrangement 5), up to motor size 160.
• High-temperature versions (up to 150ºC) (B versions: with cooling impeller).
• ARRANGEMENT 8: with joint flexible coupling.
• Inspection door, draining, weather seal on scroll and shaft access.
• Welded casing.
• Thermal insulation lagging.

ATEX

ATEX versions
On request, explosion proof versions in accordance with ATEX directive for three phase models:
Ambient temperature -20°C to +60°C, ambient pressure (abs.) 0,8 bar to 1,1 bar according to EN 14986.

• Gas:
2G IIB T2-T3-T4, Motor Exd IIB or ExeII
2G IIB+H2 T2-T3-T4, Motor ExdIIc
3G IIB T2-T3-T4, Motor ExnA (only for 3G zone)
3G IIB+H2 T2-T3-T4, Motor ExnA (only for 3G zone)

• Non-conductive dust
2D IIIB T125°C-T135°C-T195°C-T295°C
3D IIIB T125°C-T135°C-T195°C-T295°C

• Conductive dust (compulsory IP 65 motor):
2D IIIC T125°C-T135°C-T195°C-T295°C
3D IIIC T125°C-T135°C-T195°C-T295°C

Attributes

  • 61-KA-Pbdp506

    Forward curved impeller for material transport

Downloads
  • pdf_serie IT-EN_FE_KA 693.86Kb

S&P by your side

For us, customer service is as important as the quality of your products.

We help you in your purchase

Request quotes, know the status of an order and other general information.

Click here to explore
s&p by your side