Wall or Window Extract Fans
Range of Wall or Window Extract Fans
An elegant and adaptable design to any environment, this is our range of window or wall extractors with ABS plastic grills easy to mount and with shutter to prevent heating leaks and the entrance of the air from the outside.
Our glass or wall extractors can be complemented with regulators and controls for increased equipment performance.
Discover our range of wall or window extract fans and chose the model and choose the model that best suits your domestic or commercial applications such as offices, gyms, hotel receptions or bars and restaurants.
HCM-N series, the extractor of wall or window for any type of room
The range HCM-N of axial flow fans for wall or window are made of injection moulded plastic and fitted with automatic shutter, moreover the product is equipped with safety guards to prevent the entry of any foreign objects. The motor is single phase 230V-50Hz class B. All the fans are class II insulation and IPX4 rated. This range of wall or window extract fans can be complement with electronic single phase speed controllers.
HV-Stylvent series, reversible operation according to the air needs of each moment
The range of axial flow fans for wall or window mounting applications, HV-Stylvent are designed for a fast and simple installation. All the fans are supplied with tough ABS plastic grilles and shutters to prevent air entry and limit heat leakage when the extractor is not operating. All the fans are class II insulation and IPX4 rated and their mode of operation is reversible, depending on the needs of each moment. Moreover it allows natural ventilation if the shutter remains open and the fan closed.
This range of axial flow fans for wall or window mounting applications comprises of 3 diameters: 150, 200 and 300mm. Appart from the standard range, there are different configurations: manually operated models via integral pull cord, automatic models operated via control unit CR, or a radio control range.
Installation should be done in glass or panels from 3 to 25 mm thickness. The stylvent series of fans are designed for speed of installation in three easy stages: external grille, mounting of the support frame and internal grille.
The S&P wall or window extract fans can be complemented with:
CR-150: Control unit for HV-150 A, fitted with:
- On/off switch for fan operation
- On/off switch for shutter operation
- One single CR-150 unit can operate up to 5 HV-150 fans
CR-300: Control unit for HV-230 A, HV-300 A and HVE-230 A, fitted with:
– A selector for the different modes of fan operation
– A reversing switch to change the airflow direction
– One single CR-300 unit can operate up to 5 HV-230 or 300 fans.
REB-1R: speed controller including a switch to reverse the airflow direction. Only to be used with models HV-230 AE, HV-300 AE and HVE-230 AE Max 1.
CONNECTION CABLE: A (7) core wire cable for the connection of models HV-230 A and HV-300 A to the remote control unit CR-300. (Supplied on 10m rolls as standard).