Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range
Hand and Hair Dryers 
Air Handling Units
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Low profile acoustic cabinet fans, manufactured from galvanised sheet steel and internally lined with 50mm thickness of fireproof acoustic insulation (M0), with sound-absorbent insulation at the inlet.
All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. Direct drive backward curved centrifugal fan.
Brushless EC motor, IP44, with thermal overload protection, suitable for single phase supply 230V +/- 15%- 50/60Hz.
Fan supply with external ON-OFF electrical isolation switch, and potentiometer to adjust the fan speed.
Also possible to control the fan speed with external potentiometer type REB-ECOWATT or analogue input signal 0-10V.
This cabinet fan has been designed for indoor use, with inlet air temperatures between -20ºC up to +40ºC and suitable for mounting in any orientation.
All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. Direct drive backward curved centrifugal fan.
Brushless EC motor, IP44, with thermal overload protection, suitable for single phase supply 230V +/- 15%- 50/60Hz.
Fan supply with external ON-OFF electrical isolation switch, and potentiometer to adjust the fan speed.
Also possible to control the fan speed with external potentiometer type REB-ECOWATT or analogue input signal 0-10V.
This cabinet fan has been designed for indoor use, with inlet air temperatures between -20ºC up to +40ºC and suitable for mounting in any orientation.
-
ON-OFF electrical isolation switch
External potentiometer to adjust the fan speed from 10 to 100%. -
Low noise level
Acoustic insulation of 50 mm thickness fireproof fibreglass (M0) with a high resistance coating reducing the noise level significantly. -
Direct drive backward centrifugal impeller
-
Sound-absorbent insulation at the inlet
-
Installation in any orientation
Possibility to be installed upright, horizontal or inverted.
