Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range
Hand and Hair Dryers 
Air Handling Units
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
The UTBS are low profile air handling units designed specifically for installation in false ceiling.
There are 4 different sizes to move flows from 500 to 8,000 m3/h:
- UTBS-2: Flow rates from 500 to 2.150 m3/h and 360 mm high.
- UTBS-3: Flow rates from 1.200 to 4.400 m3/h and 410 mm high.
- UTBS-5: flow rates from 2.400 to 6.000 m3/h y 410 mm high.
- UTBS-8: Flow rates from 4.000 to 8.000 m3/h and 500 mm high.
Main module composed of 3 sections; filtration, colis and fan.
Filters
Filtration section with two alternatives:
- Long version P F7 with capacity for mounting two filters: F7 with very low built-in pressure drop and possibility of mounting a second filter inside the unit (supplied as accessory).
- M5 short version with capacity for a single M5 filter.
Colis section with option to equip water coils, direct expansion coils or electric batteries.
Fan section, allows the air outlet to be oriented upwards or frontally, by exchanging the front and upper panels.
Motors
Model 2 and 3: Single phase EC motors with integrated electronic protection, 230V/I/50-60Hz IP44, Class B.
Model 5: Single phase EC motors with integrated electronic protection, 230V/I/50-60Hz IP55, Class F.
Model 8: Three phase EC motors with integrated electronic protection, 400V/III/50-60Hz IP55, Class F.
Available in a version with perimetral base which facilitates the installation on roof.
Minimum ambient temperature: -10ºC.
Minimum air inlet temperature: -20ºC.
Components/Modules
-Silencers
-Mixing box
Other configurations available through the treatment unit selection program.
There are 4 different sizes to move flows from 500 to 8,000 m3/h:
- UTBS-2: Flow rates from 500 to 2.150 m3/h and 360 mm high.
- UTBS-3: Flow rates from 1.200 to 4.400 m3/h and 410 mm high.
- UTBS-5: flow rates from 2.400 to 6.000 m3/h y 410 mm high.
- UTBS-8: Flow rates from 4.000 to 8.000 m3/h and 500 mm high.
Main module composed of 3 sections; filtration, colis and fan.
Filters
Filtration section with two alternatives:
- Long version P F7 with capacity for mounting two filters: F7 with very low built-in pressure drop and possibility of mounting a second filter inside the unit (supplied as accessory).
- M5 short version with capacity for a single M5 filter.
Colis section with option to equip water coils, direct expansion coils or electric batteries.
Fan section, allows the air outlet to be oriented upwards or frontally, by exchanging the front and upper panels.
Motors
Model 2 and 3: Single phase EC motors with integrated electronic protection, 230V/I/50-60Hz IP44, Class B.
Model 5: Single phase EC motors with integrated electronic protection, 230V/I/50-60Hz IP55, Class F.
Model 8: Three phase EC motors with integrated electronic protection, 400V/III/50-60Hz IP55, Class F.
Available in a version with perimetral base which facilitates the installation on roof.
Minimum ambient temperature: -10ºC.
Minimum air inlet temperature: -20ºC.
Components/Modules
-Silencers
-Mixing box
Other configurations available through the treatment unit selection program.
