Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range
Hand and Hair Dryers 
Air Handling Units
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Range of radial fans with high efficiency electronically commuted external rotor motors. Available sizes from 133 to 630mm of impeller Ø in different widths.
Impeller manufactured from galvanized sheet steel or plastic, depending on the model.
Brushless motors IP44 or IP54 rated, depending on the model, equipped with thermal protector and ball bearings greased for life. Motors 1, 2 & 3 include a long lead with tachometer signal output, 10VDC output and 0-10VDC/PWM input cable for speed control.
Motors 4, 5 & 6 also include control input 4-20 mA / PWM and RS-485 ModBus-RTU.
Performance tested in construction type A according to the standard ErP Lot 11 using the optimal inlet ring. Please find INLET RINGS at accessories section and the drawing with the recommended mounting position between the motor-impeller and the inlet ring.
Electrical supply:
Single phase 230V-50/60Hz
Three phase 400V-50/60Hz
On request:
15VDC Output, Customized Software versions, UL certified versions, 120V versions.
Impeller manufactured from galvanized sheet steel or plastic, depending on the model.
Brushless motors IP44 or IP54 rated, depending on the model, equipped with thermal protector and ball bearings greased for life. Motors 1, 2 & 3 include a long lead with tachometer signal output, 10VDC output and 0-10VDC/PWM input cable for speed control.
Motors 4, 5 & 6 also include control input 4-20 mA / PWM and RS-485 ModBus-RTU.
Performance tested in construction type A according to the standard ErP Lot 11 using the optimal inlet ring. Please find INLET RINGS at accessories section and the drawing with the recommended mounting position between the motor-impeller and the inlet ring.
Electrical supply:
Single phase 230V-50/60Hz
Three phase 400V-50/60Hz
On request:
15VDC Output, Customized Software versions, UL certified versions, 120V versions.
