Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range
Hand and Hair Dryers 
Air Handling Units
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
-
Continuous
-
Versions
Single inlet direct-drive centrifugal fans, manufactured from anti-corrosion steel sheet with polyester paint, centrifugal backward curved impeller and dynamically balanced, three phase motor, IP55, Class F.
Motors
2 or 4 pole depending on version, IE 2 high efficiency.
Supply voltage:
Three phase 230/400V-50Hz, up to 3 kW.
400V-50Hz for more power.
Additional information
Standard orientation: LG270.
Designed to continuously circulate air up to 120ºC.
On request
Manufactured from different materials.
RD versions.
Versions with no stand (MB – Motor Flange).
60 Hz versions.
6 pole motors.
2-speed motors.
High-temperature versions (up to 250ºC. Versions R, with cooling impeller).
Inspection door, draining, weather seal on scroll and shaft access.
Motors
2 or 4 pole depending on version, IE 2 high efficiency.
Supply voltage:
Three phase 230/400V-50Hz, up to 3 kW.
400V-50Hz for more power.
Additional information
Standard orientation: LG270.
Designed to continuously circulate air up to 120ºC.
On request
Manufactured from different materials.
RD versions.
Versions with no stand (MB – Motor Flange).
60 Hz versions.
6 pole motors.
2-speed motors.
High-temperature versions (up to 250ºC. Versions R, with cooling impeller).
Inspection door, draining, weather seal on scroll and shaft access.
ATEX Versions
Explosion proof versions in accordance with ATEX Directive, for 3 phase models.
For ambient working temperatures from -20ºC to +40ºC.
-ATEX Flameproof - Gas
II 2G Exd IIC T4
II 2G Exd IIB T5
-ATEX Increased safety - Gas
II 2G Exe II T3
-ATEX Non-sparking motor -Gas
II 2G Ex II
-ATEX - Dust
II 3D Ex tD 125ºC or 135ºC
To select CRT ATEX refer to performance curves, or Easyvent.
Note electrical data may vary for ATEX motors.
Explosion proof versions in accordance with ATEX Directive, for 3 phase models.
For ambient working temperatures from -20ºC to +40ºC.
-ATEX Flameproof - Gas
II 2G Exd IIC T4
II 2G Exd IIB T5
-ATEX Increased safety - Gas
II 2G Exe II T3
-ATEX Non-sparking motor -Gas
II 2G Ex II
-ATEX - Dust
II 3D Ex tD 125ºC or 135ºC
To select CRT ATEX refer to performance curves, or Easyvent.
Note electrical data may vary for ATEX motors.
-
Inspection door
On request for models from 251 to 562.
In standard for models 631 and bigger. -
Scroll position
Can be modify on construction site for models up to 562. Supplied from factory at the choosen positionning with no possibilty to modify for models 631 and bigger. -
