Cylindrical cased axial flow fans, for general ventilation.
Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish to EN 1461. Corrosion category C4.
Variable pitch angle impeller, dynamically balanced to ISO 14694: G6.3, made from high grade aluminum. Hubs made from aluminium or pressed sheet steel, depending on diameter and mechanical requirements.
Standard air operation temperature range: -20ºC to +40ºC.
Short casing versions:
(C) Standard
(CK) Includes an external terminal box for ease of connection.
Long casing versions:
(LK) Includes an external terminal box for ease of connection, and a spy hole to check impeller rotation.
(LP) Includes an inspection door for easy access to motor.
(LPK) Includes both external terminal box and inspection door.
Check EasyVent to select the most suitable configurations for the installation, and obtain the corresponding datasheets.
Soler&Palau Sistemas de Ventilación SLU certifies that this model is licensed to bear the AMCA Seal for Air Performance. The revision version is EasyVent v11, May 2020. Certification may be checked at AMCA
Motors
Single speed in 2 and 4 poles.
IE3 efficiency category from 0,75kW onwards, IE2 minimum for lower kW motors.
IE4 efficiency category for motor powers from 75kW to 200kW.
Not applicable to 8 pole or two speed motors.
All motors are IP55, Class F insulation.
Electrical supplies:
Three phase 220-240/380-415-50/60Hz up to 3 kW.
Three phase 380-415V-50Hz, for higher power motors and two speed motors.
Suitable for inverter control.
60Hz versions available in EasyVent.
Other data
Standard air direction Impeller-Motor (Form B).
Suitable for horizontal (B, A) or vertical (BD, AU) mounting installation.
On request
Single speed motors in 6 poles.
Two speed motors in 2/4, 4/6, 4/8 and 6/12 poles.
Motors provided with PTC thermistor or space heaters.
Casing in stainless steel or paint finish.
Air direction Motor-Impeller (Form A).
Reversible impeller (AB).
Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish to EN 1461. Corrosion category C4.
Variable pitch angle impeller, dynamically balanced to ISO 14694: G6.3, made from high grade aluminum. Hubs made from aluminium or pressed sheet steel, depending on diameter and mechanical requirements.
Standard air operation temperature range: -20ºC to +40ºC.
Short casing versions:
(C) Standard
(CK) Includes an external terminal box for ease of connection.
Long casing versions:
(LK) Includes an external terminal box for ease of connection, and a spy hole to check impeller rotation.
(LP) Includes an inspection door for easy access to motor.
(LPK) Includes both external terminal box and inspection door.
Check EasyVent to select the most suitable configurations for the installation, and obtain the corresponding datasheets.
Soler&Palau Sistemas de Ventilación SLU certifies that this model is licensed to bear the AMCA Seal for Air Performance. The revision version is EasyVent v11, May 2020. Certification may be checked at AMCA
Motors
Single speed in 2 and 4 poles.
IE3 efficiency category from 0,75kW onwards, IE2 minimum for lower kW motors.
IE4 efficiency category for motor powers from 75kW to 200kW.
Not applicable to 8 pole or two speed motors.
All motors are IP55, Class F insulation.
Electrical supplies:
Three phase 220-240/380-415-50/60Hz up to 3 kW.
Three phase 380-415V-50Hz, for higher power motors and two speed motors.
Suitable for inverter control.
60Hz versions available in EasyVent.
Other data
Standard air direction Impeller-Motor (Form B).
Suitable for horizontal (B, A) or vertical (BD, AU) mounting installation.
On request
Single speed motors in 6 poles.
Two speed motors in 2/4, 4/6, 4/8 and 6/12 poles.
Motors provided with PTC thermistor or space heaters.
Casing in stainless steel or paint finish.
Air direction Motor-Impeller (Form A).
Reversible impeller (AB).