Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range
Hand and Hair Dryers 
Air Handling Units
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Roof mounted axial flow fans, with vertical air discharge configuration, for air extract.
Casing formed from rolled sheet steel welded on the base with a corrosion resistant hot dipped galvanized finish to EN 1461. Corrosion category C4.
Backdraft shutter and bird proof outlet guard. Cylindrical casing formed from rolled sheet steel protected against corrosion by grey polyester paint coating. Corrosion category C3H.
Variable pitch angle impeller, dynamically balanced to ISO 14694: G6.3, made from high grade aluminum blades locked within a pressed sheet steel hub.
Electrical isolator IP65 fitted to fan casing.
Three phase motor, IP55, Class F.
Standard operation temperature range -20ºC to +40ºC.
Motors
Single speed 4 pole.
IE3 efficiency category from 0,75kW onwards, IE2 minimum for lower kW motors. Not applicable to 8 pole or two speed motors.
220-240/380-415V-50Hz up to 3 kW.
380-415V-50Hz, for higher power motors and two speed motors.
Suitable for inverter control.
(60Hz version available in EasyVent).
Additional information
Standard air direction Motor-Impeller (Form A).
On request
Single speed 6 pole motors.
Two speed motors in 4/6, 4/8 and 6/12 poles.
Motors with PTC thermistor or heating resistors.
Paint finish to RAL colour.
Check EasyVent to select the most suitable configuration for the installation, and obtain the corresponding datasheet.
Casing formed from rolled sheet steel welded on the base with a corrosion resistant hot dipped galvanized finish to EN 1461. Corrosion category C4.
Backdraft shutter and bird proof outlet guard. Cylindrical casing formed from rolled sheet steel protected against corrosion by grey polyester paint coating. Corrosion category C3H.
Variable pitch angle impeller, dynamically balanced to ISO 14694: G6.3, made from high grade aluminum blades locked within a pressed sheet steel hub.
Electrical isolator IP65 fitted to fan casing.
Three phase motor, IP55, Class F.
Standard operation temperature range -20ºC to +40ºC.
Motors
Single speed 4 pole.
IE3 efficiency category from 0,75kW onwards, IE2 minimum for lower kW motors. Not applicable to 8 pole or two speed motors.
220-240/380-415V-50Hz up to 3 kW.
380-415V-50Hz, for higher power motors and two speed motors.
Suitable for inverter control.
(60Hz version available in EasyVent).
Additional information
Standard air direction Motor-Impeller (Form A).
On request
Single speed 6 pole motors.
Two speed motors in 4/6, 4/8 and 6/12 poles.
Motors with PTC thermistor or heating resistors.
Paint finish to RAL colour.
Check EasyVent to select the most suitable configuration for the installation, and obtain the corresponding datasheet.
