Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Domestic Ventilation
Domestic Heating
Humidifiers 
Air Treatment Units 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Industrial Ventilation
Heating Industrial Range 
Mounting Accessories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Range of single inlet direct drive centrifugal fans manufactured by injection moulding.
Antistatic polypropylene housing. Motor support and anticorrosive gaskets material providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Working temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
-Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
-Nylon (models from 14 to 25)
-Polypropylene (models 30 and 35).
-Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
Antistatic polypropylene housing. Motor support and anticorrosive gaskets material providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Working temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
-Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
-Nylon (models from 14 to 25)
-Polypropylene (models 30 and 35).
-Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
Equipped with explosion-proof motors according to the ATEX Directive for three-phase models: - Explosion-proof II2G EExdIIBT4 II 2G Exd IIB+H2 T4, with Exd IIC T4 motor (on request) To select CMPT ATEX models, check the characteristic curves
