Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Domestic Ventilation
Domestic Heating
Humidifiers 
Air Treatment Units 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Industrial Ventilation
Heating Industrial Range 
Mounting Accessories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
-
-
-
LOW PROFILE
-
-
Heat recovery
-
Domestic MVHR
Single dwellings -
Domestic MVHR
Multi dwelling blocks -
Connectair
-
DESIGNED FOR AN EASY INSTALLATION
Domestic MVHR unit with high efficiency counterflow heat exchanger (up to 92%) and low consumption EC motors. The unit assures a continuous and balanced ventilation system, extracting moist stale air from the wet rooms and at the same time introducing a tempered and filtered fresh air to the habitable rooms.
The optimized design allows compliance with the highest standards assuring a very low leakage level, high thermal insulation and a minimal sound level. The integrated humidity sensor allows an automatic function tracking the indoor humidity and proportionally adjusting the fans speed.
Inlet/extraction filter G4 (ISO coarse 65%, at 140 m3 /h), F7 (ISO ePM1 70%, at 140 m3 /h). Option, M5 (ISO ePM10 50%, at 140 m3 /h). An integrated 100% bypass is activated either automatically or manually. The bypass is particularly useful when the indoors temperature is higher than outdoors and free cooling is preferable.
The optimized design allows compliance with the highest standards assuring a very low leakage level, high thermal insulation and a minimal sound level. The integrated humidity sensor allows an automatic function tracking the indoor humidity and proportionally adjusting the fans speed.
Inlet/extraction filter G4 (ISO coarse 65%, at 140 m3 /h), F7 (ISO ePM1 70%, at 140 m3 /h). Option, M5 (ISO ePM10 50%, at 140 m3 /h). An integrated 100% bypass is activated either automatically or manually. The bypass is particularly useful when the indoors temperature is higher than outdoors and free cooling is preferable.
-
Wired capacitive controller for intuitive control of the unit.
-
Touch screen
Remote (wired) touch screen display panel.
Fuctions: easy control, speed settings, manual bypass, boost activation, automatic mode activation and dirty filter alarm. -
Installer friendly
Simple access to all the components.
