Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Domestic Ventilation
Domestic Heating
Humidifiers 
Air Treatment Units 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Industrial Ventilation
Heating Industrial Range 
Mounting Accessories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
-
-
-
Single dwellings
-
Multi dwelling blocks
-
Heat recovery unit
Whole house heat recovery unit for single dwelling houses, with crossflow heat exchanger. It guarantees continuous air replacement in single dwelling houses up to 90% of efficiency.
Equipped with 2 centrifugal fans (a supply and an extract fan), each with a 230V-50Hz motor, Class B, 3-speed, designed for continuous operation, and terminal housing to connect the power supply cable.
100% manual bypass.
Equipped with filter change alarm.
Multi-position system. It can be mounted on the floor and into the false ceiling.
Multi-position system. It can be mounted on the floor and into the false ceiling.
To ensure good air quality, is equipped with a M5 filters: (ISO ePM10 50%, a 210 m3/h) on the inlet side and a G4 (ISO coarse 65%, a 210 m3/h) on the extraction side.
In case of low outside temperatures it is necessary to install a pre-heating coil.
Equipped with 2 centrifugal fans (a supply and an extract fan), each with a 230V-50Hz motor, Class B, 3-speed, designed for continuous operation, and terminal housing to connect the power supply cable.
100% manual bypass.
Equipped with filter change alarm.
Multi-position system. It can be mounted on the floor and into the false ceiling.
Multi-position system. It can be mounted on the floor and into the false ceiling.
To ensure good air quality, is equipped with a M5 filters: (ISO ePM10 50%, a 210 m3/h) on the inlet side and a G4 (ISO coarse 65%, a 210 m3/h) on the extraction side.
In case of low outside temperatures it is necessary to install a pre-heating coil.
-
Easy maintenance PPE body that provides thermal insulation and lightness. -
ORKA HR, high efficient counter flow heat exchanger
Manufactures from polypropylene plates.
ORKA ST, high efficient counter flow heat exchanger
Manufactures from polypropylene plates. -
Double drain for floor or false ceiling installation. -
Integrated rubber seals.
Circular connection flange with integrated rubber seals. -
Incorporated remote control with double-switch:
- by-pass activation.
- speed change. -
TimerDirty filter alarm, by electronic removable time-switch.
