Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Domestic Ventilation
Domestic Heating
Humidifiers 
Air Treatment Units 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Industrial Ventilation
Heating Industrial Range 
Mounting Accessories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Use
These fans are particularly suitable for the removal of air and noxious gases, and for all those applications where large volumes of air have to be moved at low and medium pressures. They are installed in founderies, woodworks, and in chemical industries.
Working temperature
- 20°C + 60°C.
Construction
Axial-flow fan, belt drive. The impeller is made of die-cast aluminium and has adjustable blades. The casing is made of welded sheet steel and has a double flange. For the size ≥ 1000 the fans are standard hot galvanized.
Motor
The motor is three-phase, 230/400 V, 50 Hz, B3 (other frequencies, tensions on demand).
Direction of the air
Normally supplied with the air flowing from the support to the impeller (A), on demand the fans can be supplied with the direction from the impeller to the motor (B).
Specifications
The characteristics quoted in the tables are valid for the construction without belt protection; as to construction with belt protection, the characteristics change as follows: CHARACTERISTICS: - 10%; ABSORPTION - 10%; NOISE LEVEL + 1÷2 dB/A.
These fans are particularly suitable for the removal of air and noxious gases, and for all those applications where large volumes of air have to be moved at low and medium pressures. They are installed in founderies, woodworks, and in chemical industries.
Working temperature
- 20°C + 60°C.
Construction
Axial-flow fan, belt drive. The impeller is made of die-cast aluminium and has adjustable blades. The casing is made of welded sheet steel and has a double flange. For the size ≥ 1000 the fans are standard hot galvanized.
Motor
The motor is three-phase, 230/400 V, 50 Hz, B3 (other frequencies, tensions on demand).
Direction of the air
Normally supplied with the air flowing from the support to the impeller (A), on demand the fans can be supplied with the direction from the impeller to the motor (B).
Specifications
The characteristics quoted in the tables are valid for the construction without belt protection; as to construction with belt protection, the characteristics change as follows: CHARACTERISTICS: - 10%; ABSORPTION - 10%; NOISE LEVEL + 1÷2 dB/A.
