Cylindrical cased axial flow fans
THGT Series

THGT.

> Download images
View complete information
  • THGT.bdp532
  • Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0348

    Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0348

  • Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0742

    Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0742

  • THGT.bdp508
  • THGT.bdp476
  • Print this page
  • Download the catalog series in pdf

THGT.

Cylindrical cased axial flow fans, for general ventilation.
Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish to EN 1461. Corrosion resistance category C4.
Variable pitch angle impeller, dynamically balanced to ISO 14694: G6.3, made from high grade aluminum. Hubs made from aluminium or pressed sheet steel, depending on diameter and mechanical requirements.
Standard air operation temperature range: -20ºC to +40ºC.

Short casing versions:
(C) Standard
(CK) Includes an external terminal box for ease of connection.

Long casing versions:
(LK) Includes an external terminal box for ease of connection, and a spy hole to check impeller rotation.
(LP) Includes an inspection door for easy access to motor.
(LPK) Includes both external terminal box and inspection door.

Check EasyVent to select the most suitable configurations for the installation and obtain the corresponding datasheets.

Soler&Palau Sistemas de Ventilación SLU certifies that this model is licensed to bear the AMCA Seal for Sound and Air Performance. The revision version is EasyVent v11, May 2020. Certification may be checked at AMCA.

Motors
Single speed in 2 and 4 poles.
IE3 efficiency category from 0,75kW onwards, IE2 minimum for lower kW motors.
IE4 efficiency category for motor powers from 75kW to 200kW.
Not applicable to 8 pole or two speed motors.
All motors are IP55, Class F insulation.
Electrical supplies:
Three phase 220-240/380-415-50/60Hz up to 3 kW.
Three phase 380-415V-50Hz, for higher power motors and two speed motors.
Suitable for inverter control.
60Hz versions available in EasyVent.

Other data
Standard air direction Impeller-Motor (Form B).
Suitable for horizontal (B, A) or vertical (BD, AU) mounting installation.

On request
Single speed motors in 6 poles.
Two speed motors in 2/4, 4/6, 4/8 and 6/12 poles.
Motors provided with PTC thermistor or space heaters.
Casing in stainless steel or paint finish.
Air direction Motor-Impeller (Form A).
Reversible impeller (AB).

Attributes

  • THGT.bdp506

    Motor approved S1 and S2
    F400-120 and F300-120 certified motors approved for running continuously (S1) or for emergency operation (S2).

  • THGT.bdp487

    Corrosion resistance
    Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish.

  • THGT.bdp481

    Motor support
    Manufactured fromsheet steel with a corrosion resistant hot dip galvanised or Magnelis finish. Models from 400 to 800.

  • THGT.bdp531

    Aerodynamic motor support
    Aerodynamic design of the motor support to optimise airflow performances models from 900 to 1250.

  • THGT.bdp501

    Motor support (1400 and 1600 mm diameter):
    Welded on the fan casing. The whole assembly with a corrosion resistant hot dip galvanised finish.

  • THGT.bdp496

    Impeller dynamically balanced
    According to ISO 1940 standard, providing vibration free operation.

  • THGT.bdp549

    Wide blade design higher pressure
    Wide blade design to ensure the highest efficient airflow performances.

  • THGT.bdp540

    Terminal box
    External terminal box to ease the electrical connection.

Downloads
  • pdf_ins1 Ins_Axial_Atex_fans 2.87Mb
  • pdf_ins2 Ins_DESENFUMAGE_GENERICAS 1.44Mb
  • pdf_serie EN_THGT 4.64Mb

S&P by your side

For us, customer service is as important as the quality of your products.

We help you in your purchase

Request quotes, know the status of an order and other general information.

Click here to explore
s&p by your side