AXIAL JET FANS
Series TGT-JFU

Unidirectional tubular axial fans, Jet Fans, designed to move large volumes of air in all types of large spaces.
Air performance (free discharge flow rate and thrust) and acoustic data obtained according to ISO 13350.

Description
Diameters from 450 to 630 mm.
Dynamically balanced impeller according to ISO 14694: G6.3, with aerofoil-type blades and semi-hub made of aluminum alloy according to EN 1706.
Casing and 2 support feet made of steel, according to EN 10130, hot-dip galvanized according to EN 1461.
External junction box (standard) or disconnect switch (optional).
Two circular silencers made of galvanized steel sheet.
Protective grille on intake and discharge.
For transport, the 450 diameter model will be delivered assembled. For diameters from 500 to 630, the fan can be delivered in 3 parts.

Motors
Three-phase power supply 400V/50Hz, IP55.
Two speeds 2/4 poles Dahlander connection type. Or single speed 2 poles.
Operating ambient temperature: -20ºC to +40ºC.

On request
Single speed motor, 2, 4 or 6 poles.
Inlet guard and outlet deflector (accessory).
Instead of the junction box, a safety start-stop switch IP65, factory installed or as an accessory.
Exterior paints in RAL colors.