VENTILATEURS HÉLICOÏDES DE TOITURE
SÉRIE THGT-HATCH

THGT-HATCH

> Télécharger les images
  • Imprimer cette page
  • Télécharger la page catalogue

THGT-HATCH

Combining a motorized hatched enclosure and a mechanical extract fan, the THGT-HATCH is a roof-mounted unit designed for vertical smoke extract in fire conditions.
F300/F200-120 and F400-120 certification for dual purpose as per EN 12101-3 (0370-CPR-6216 and 0370-CPR-6213 respectively).

Check EasyVent to select the most suitable configurations for the installation, and obtain the corresponding datasheets.

Fan
THGT series fan, bearer of the AMCA Seal for Air Performance.
Long casing configuration and Form A, for easy impeller access for maintenance.
Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish to EN 1461. Corrosion category C4.
Variable pitch angle impeller, dynamically balanced to ISO 14694: G6.3, made from high grade aluminum. Hubs made from aluminium or pressed sheet steel, depending on diameter and temperature requirements.
2 Poles F400-120 model with aluminium impeller-hub formed from a one piece casting.

Hatch
Designed and built for ease of installation and commissioning, energy savings and to withstand severe weather conditions.
Standard design base for roof curb mounting, hot dip galvanised finish to EN 1461. Corrosion category C4.
Mounting through roof on beams or purlins possible with JBS-HATCH accessory. Corrosion category C4.
Air tightness <, 3m3/h/m2 @ 50Pa.
Insulation value U = 0,42W/(m2K) thanks to thermal bridge break.
Snow Load SL 1000 @ T(-25).
Wind Load WL 1500 (sizes 1, 2 &, 3) &, 1000 (size 4).
Outside ambient temperature -25ºC to +40ºC.
Opening mechanism for 20,000 cycles.
Includes contacts for open/closed HATCH position monitoring.
Connections for motor and powered actuators via independent IP65 external terminal boxes.

Motors &, actuators
Single speed in 2 and 4 poles.
Two speed in 4/8 poles.

Caractéristiques

  • THGT-HATCHbdp506

    Embase pour installation

  • THGT-HATCHbdp487

    Anneaux de levage

  • THGT-HATCHbdp481

    Boitier de raccordement avec interrupteur marche/arrêt

  • THGT-HATCHbdp531

    Boitier de raccordement des servomoteurs

Téléchargements
  • pdf_ins1 Ins_TGT-THGT-HATCH 1.76Mb
  • pdf_serie FR_THGT-HATCH 881.41Kb