Coffrets de commande pour Systèmes à Différentiel de Pression (PDS)
PDS CONTROL MD

Control panels for Pressure Differential Systems (PDS). Designed and programmed to satisfy the requirements described in EN 12101-6. These allow automatic control of airflow and pressure differential in escape routes, elevators or shelter areas. Series for systems that also require control of a fail-safe motorized damper with integrated optical smoke detector.

System Control – Fire fighters key-lock switch
AUTO: Automatic control through pressure transducer + VSD (default position).
ON: Manual activation of the system with 2 pre-set fan speeds (MIN/MAX). Allows to manually force the MD dampers to open, ignoring the smoke sensor.
OFF: Manual STOP and system reset, ignores external signals.

Main Features
Performance verified in AMCA accredited and ENAC audited laboratory.
Key-lock switch for manual override for fire-fighters (ON/AUTO/OFF), also useful for commissioning stage and maintenance operations.
AUTO/OPEN for damper control, forces its opening ignoring the smoke sensor.
Remote control using PDS REM MD series accessories.
Status indicators: PDS CONTROL OK/FAN ON/FAULT/FIRE/DAMPER OPEN/SMOKE IN DAMPER.
Calibration-friendly for ease of commissioning and routine maintenance operations.
Pre-cabled maneuver for remote activation of daily ventilation, by means of a time programmer.
Outputs for status monitoring.
Modbus protocol communication available.
Steel enclosure.

Models
PDS CONTROL MD for single fan systems with an MD damper.
PDS CONTROL MD2 for single fan systems with two MD dampers.
PDS CONTROL MD DUAL for systems that require a back-up stand-by fan, whether in series or in parallel, and an MD damper.
PDS CONTROL MD2 DUAL for systems that require a back-up stand-by fan, whether in series or in parallel, and two MD dampers.

Supply Voltage
M - Single phase, 220-240V 50/60Hz up to 2,2kW.
T - Th