Tourelles centrifuges autoregulees
Série CRVB/T-N ECOWATT PLUS

CRVB/T-N ECOWATT PLUS

  • CRVB-N_ECO_PLUSbdp532
  • CRVB-N_ECO_PLUSbdp547
  • CRVB-N_ECO_PLUSbdp483
  • CRVB-N_ECO_PLUSbdp508
  • CRVB-N_ECO_PLUSbdp476

Dernière version du Software d'accessoires SPCM-WS ECOWATT PLUS

CRVB/T-N ECOWATT PLUS

Centrifugal roof mounted fan in vertical discharge format fitted with:
- EC external rotor motor.
- Centrifugal backward curved impeller.
- Steel finger guard.
- Base manufactured from galvanized sheet steel.
- ON-OFF electrical isolated switched.

Motors
High-performance and low-energy-consumption EC brushless motor with external rotor, ball bearings and thermal protector.
Single phase models 230V±10% 50/60Hz, IP44.
Three phase models 400V±10% 50/60Hz, IP54.

MODELS 250 TO 355
With built-in plug and play control, pre-configured to work at a constant pressure (COP) and a set point of 100 Pa. The PROSYS ECOWATT programming console will allow you to adjust the settings of the constant pressure (COP) mode and three additional modes:
- Constant air volume (CAV).
- Proportional (VAV).
- Mínimum-Maximum.
- Time programmer (TIMER RTC accessory needed).

Constant Pressure operation mode (COP)
- Minimum fan speed between 0-50%.
- Maximum fan speed between 50-100%.
- Night position adjustable between 25-100% of the pressure in high speed.

Constant Volume operation mode (CAV)
- Minimum fan speed between 0-50%.
- Maximum fan speed between 50-100%.
- Night position adjustable between 50-100% of the volume in high speed.

Proportional operation mode (VAV)
- 2 analogical inputs 0-10V or 4-20mA.
- The control operates in function of the maximum demand parameter.
- Minimum fan speed between 0-50%.
- Maximum fan speed between 50-100%.
- Alarm relay output.

Min-Max operation mode
-Function of the contact position connected to digital input, the fan runs at high speed or at low speed.
- Minimum fan speed between 0-50%.
- Maximum fan speed between 50-100%.

Timer (RTC)
By purchasing the Timer (RTC) accessory alongside the
PROSYS ECOWATT progr

Focus

  • CRVB-N_ECO_PLUSbdp506

    Roue centrifuge à réaction
    Eviter l’accumulation de poussière.

  • CRVB-N_ECO_PLUSbdp487

    Grille anti-volatiles.
    Grille en acier pour protection des personnes.

  • CRVB-N_ECO_PLUSbdp481

    Boîtier de programmation PROSYS ECOWATT PLUS (Vendue séparément comme accessoire)
    Commande externe permettant de régler les différents paramètres de fonctionnement de la tourelle.

  • CRVB-N_ECO_PLUSbdp531

    TIMER RTC ECOWATT (Accessoire).
    Platine électronique additionnelle permettant, avec la console de programmation PROSYS ECOWATT, de faire travailler la tourelle suivant une programmation horaire. Jusqu’à trois plages horaires journalières. Période de vacances.

S&P à tes côtés

Pour nous, le service client est aussi important que la qualité de nos produits.

Nous vous aidons dans vos achats

Demander des devis, connaître le statut d'une commande et d'autres informations générales.

s&p by your side