Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range
Hand and Hair Dryers 
Air Handling Units
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
-
Continuous
-
Versions
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC. The casings are manufactured from high grade rolled sheet steel protected against corrosion by cataforesis primer and black polyester paint finish. The drive system consists of an industrial poly V-belt drive pulley system which is enclosed within metal protective guard. All models incorporate diecast aluminium impellers available with 2 or 3 fixed blade angles. The impellers are finished in black colour polyester paint coating.
Motors
All the motors are IP55 class F, fitted with ball bearings greased for life.
Electrical supplies:Three phase 230/400V-50Hz or 400V-50Hz (See characteristics chart).
Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).NI versions incorporate safety switch, stop/start.
On request
NI versions: fitted with ON/OFF isolation switch.Single phase 230V-50Hz motors (up to 1.5 kW).
Motors
All the motors are IP55 class F, fitted with ball bearings greased for life.
Electrical supplies:Three phase 230/400V-50Hz or 400V-50Hz (See characteristics chart).
Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).NI versions incorporate safety switch, stop/start.
On request
NI versions: fitted with ON/OFF isolation switch.Single phase 230V-50Hz motors (up to 1.5 kW).
ATEX versionsOn request, explosion proof versions in accordance with ATEX Directive, for 3 phase models.
For ambient working temperatures from -20ºC to +40ºC.
Air direction motor- impeller (A flow)
- ATEX Flameproof - Gas:
In standard ATEX version flameproof motors are without thermal protection.
If used with frequency inverter, flameproof motors with a PTC-type thermal protection must be specified at order.
II 2G Ex d IIB T4
II 2G Ex d IIB+H2 T4 (with Ex d IIC T4 motor)
- ATEX Increased safety - Gas:
II 2G Ex e II T3
- ATEX - Dust:
In standard ATEX version, ATEX motors for dust are without thermal protection.
If used with frequency inverter, ATEX motors for dust with a PTC-type thermal protection must be specified at order.
For ambient working temperatures from -20ºC to +40ºC.
Air direction motor- impeller (A flow)
- ATEX Flameproof - Gas:
In standard ATEX version flameproof motors are without thermal protection.
If used with frequency inverter, flameproof motors with a PTC-type thermal protection must be specified at order.
II 2G Ex d IIB T4II 2G Ex d IIB+H2 T4 (with Ex d IIC T4 motor)- ATEX Increased safety - Gas:
II 2G Ex e II T3- ATEX - Dust:
In standard ATEX version, ATEX motors for dust are without thermal protection.
If used with frequency inverter, ATEX motors for dust with a PTC-type thermal protection must be specified at order.
-
Easy to mantain
Swing-out fan casing assembly provides an easy access for cleaning or maintenance. -
Dynamically balanced impeller
Impellers are dynamically balanced, according to ISO 1940, providing vibration free operation and coated with a special low friction paint repelling the dirtiness. -
ON/OFF isolation switch
NI versions incorporate safety switch, stop / start.
