Bathroom Extract Fans
Air Handling Units
In-line Duct Fans
Heat Recovery Units
Acoustic Cabinet Fans
Roof mounted fans
Comfort Cooling Range
Hand and Hair Dryers 
Air Purifiers
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
In-line Duct Fans
Acoustic Cabinet Fans
Roof mounted fans
Atex Fans for Explosive Hazardous 
Wall or Window Extract Fans
Whole house Extract Units
Kitchen Extract Fans 
Kitchen Extract Hoods 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Acoustic twin cabinet fans manufactured from galvanised steel sheet and internally lined with 25mm thickness of fireproof acoustic insulation (M0). All models incorporate two S&P ECOWATT backward curved centrifugal fans, brushless EC motors with thermal overload protection. Integral control unit providing automated run and standby by tacho/low current sensing, duty-sharing adjustable from 3 to 24 hours, (in 3 hour steps) and BMS output/remote fault indication.
Remote On/Off via volt-free contact and/or 230V signal. Variable Speed Control, manually via an optional secondary S&P REB ECOWATT or REB-CVF controller, or automated via a 0-10V signal from an external source.
Installer-defined fixed speed control either continuous or on-demand (triggered by an external switch), or one, two or three speeds defined during installation to provide a minimum/middle/maximum speed ventilation system, the middle and maximum speeds being selected by an external switch/sensor (either volt-free and/or 230V).
Integral over-run timer.
Electrical supply: Single phase 230V-50Hz
Working temperature from -20ºC to +40ºC
Remote On/Off via volt-free contact and/or 230V signal. Variable Speed Control, manually via an optional secondary S&P REB ECOWATT or REB-CVF controller, or automated via a 0-10V signal from an external source.
Installer-defined fixed speed control either continuous or on-demand (triggered by an external switch), or one, two or three speeds defined during installation to provide a minimum/middle/maximum speed ventilation system, the middle and maximum speeds being selected by an external switch/sensor (either volt-free and/or 230V).
Integral over-run timer.
Electrical supply: Single phase 230V-50Hz
Working temperature from -20ºC to +40ºC
-
Digital display of running, stopped and/or fault condition.
-
Pitched lid allows for external siting. Can be mounted horizontally or vertically (airflow rising only).
Drop-rods can be supplied as an accessory for suspending the unit from the ceiling. -
Low noise level:
Internally lined with 25mm thickness of fireproof acoustic insulation (M0).
Silencer can be supplied as an accessory. -
Provision to operate a system damper actuator (can be supplied as an accessory).
