Low-profile air handling units
Collective ventilation dwellings
- UTBS-2: airflow from 500 to 1700 m3/h and 360 mm height.
- UTBS-3: airflow from 1200 to 3000 m3/h and 410 mm height.
- UTBS-5: airflow from 2400 to 5000 m3/h and 410mm height.
- UTBS-8: airflow from 4000 to 8000 m3/h and 500 mm height.
Double skin sandwich panels with 25 mm mineral wool insulation (good thermal and acoustic performance).
Plastic coated outer panel and galvanised steel inner panel.
High performance backward curved centrifugal, direct driven fans (plug fans) dynamically balanced.
High efficiency three phase motors with protection IP54 and insulation class F. Motors are designed to work with a frequency drive.
Motors equipped with thermal protection (PTO).
Components / Moduls:
- Chilled water coils with stainless steel drip tray and droplet eliminator.
- Heat exchanger.
- By-pass for free-cooling.
- Sound attenuators.
- Mixing box.
- Filter box.
- Plenum box.
In order to meet ErP requirements, Frequency converter must to be delivered with each UTBS. Try the suitable frequency converter according to selected motor power, and installation conditions (See table of accessories).
Product selection software
S&P air handling units selection software available.
Easy access to filters and fans from the side.
High quality finishing with aluminium profile structure, providing a robust and tight assembly.
Easy access to filters
Easy-to-assemble filter mounting system.
Side junction box
For ease of access during installation.
Pressure tappings in the filters and the fans.
Glands for the motor wiring cable.
S&P by your side
For us, customer service is as important as the quality of your products.
We help you in your purchase
Request quotes, know the status of an order and other general information.