Centrifugal Single Inlet Fans
CMB / CMT Series

CMB/CMT

> Download images
  • <strong>Continuous</strong>

    Continuous

  • <strong>Continuous</strong>

    Continuous

  • <strong>Versions</strong>

    Versions

  • Print this page
  • Download the catalog series in pdf

CMB/CMT

Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC or 110ºC (Series 1) or 150ºC (Series 2 and 3). All casings are manufactured from electro-welded sheet steel protected against corrosion by grey epoxy-polyester paint coating.
All models incorporate forward curved centrifugal impellers manufactured from galvanised sheet steel.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.

Motors
All motors are IP55, Class F (1) with ball bearings greased for life.
Electrical supply:
-Single phase 230V-50Hz.
-Three phase 230/400V-50Hz up to 3kW.
-Three phase 400V-50Hz, for higher power motors.
Series 1 are equipped with B14 flange mounted motor.
Series 2 & 3 are equipped with B3 foot mounted motor.
(1) Series 1: Some motors are IP44, Class B

Additional information
The scroll can be orientated in 8 different positions as per the table below.
Standard supplied position: LG 270.

ATEX

ATEX versions
On request, explosion proof versions in accordance with ATEX Directive, for 3 phase models.
For ambient working temperatures from -20ºC to +40ºC.
- ATEX Flameproof - Gas:
In standard ATEX version flameproof motors are without thermal protection.
If used with frequency inverter, flameproof motors with a PTC-type thermal protection must be specified at order.
II 2G Exd IIB T4
II 2G Exd IIB+H2 T4 (with Ex d IIC T4 motor)
- ATEX Increased safety - Gas:
II 2G Ex e II T3
- ATEX - Dust:
In standard ATEX version, ATEX motors for dust are without thermal protection.
If used with frequency inverter, ATEX motors for dust with a PTC-type thermal protection must be specified at order.
Suspended flammable particles and non

Attributes

  • CMB/CMTbdp506

    Impeller dynamically balanced
    Forward curved centrifugal impellers dynamically balanced, according to ISO 1940 standard, providing vibration free operation.

Downloads
  • pdf_ins1 Ins_CMT-CRMT 2.54Mb
  • pdf_serie EN_CMB-CMT 1.83Mb

S&P by your side

For us, customer service is as important as the quality of your products.

We help you in your purchase

Request quotes, know the status of an order and other general information.

s&p by your side