Cylindrical cased axial flow fans
Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0348
Officially approved to EN12101-3 standard. Certificate nº 0370-CPD-0742
Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish for all models.
All models F400-120 except 2 poles incorporate separate high grade diecast aluminium blades locked within an aluminium injected hub (diameters from 400 to 630) or a pressed sheet steel hub.
(diameters from 710 to 1600).
F300/F200-120 models incorporate an aluminium injected hub (diameters from 400 to 800) or a pressed sheet steel hub.
(diameters from 900 to 1600).
2 POLES F400-120 model with aluminium impeller / hub formed from a one piece casting.
All models are available in both short and long casing versions except 2 poles F400-120 model only supplied with long casing.
Short casing versions:
Check EasyVent to select the most suitable configurations for the installation, and obtain the corresponding datasheets.
Soler&Palau Sistemas de Ventilación SLU certifies that this model is licensed to bear the AMCA Seal for Air Performance. The revision version is EasyVent v11, May 2020. Certification may be checked at AMCA
Available, depending upon the model:
- with three phase motors in 2, 4 or 6 poles.
- with three phase two speed motors, 2/4,
4/8, 4/6 or 6/12 poles.
F300-120 & F400-120 motors are IP55, class H insulation.
Three phase 380/415V-50Hz, for higher power motors and two speed motors.
(See characteristics chart).
(*60Hz versions available in EasyVent).
In emergeny operation, no need for DOL or de-rating, as long as the VFTM range of VSds is used, and/or requirements defined in EN 12101-3 are followed.
Casing in stainless steel or paint finish.
Motors provided with PTC thermistor or space heaters.
Motor approved S1 and S2
F400-120 and F300-120 certified motors approved for running continuously (S1) or for emergency operation (S2).
Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish.
Manufactured fromsheet steel with a corrosion resistant hot dip galvanised or Magnelis finish. Models from 400 to 800.
Aerodynamic motor support
Aerodynamic design of the motor support to optimise airflow performances models from 900 to 1250.
Motor support (1400 and 1600 mm diameter):
Welded on the fan casing. The whole assembly with a corrosion resistant hot dip galvanised finish.
Impeller dynamically balanced
According to ISO 1940 standard, providing vibration free operation.
Wide blade design higher pressure
Wide blade design to ensure the highest efficient airflow performances.
External terminal box to ease the electrical connection.
S&P by your side
For us, customer service is as important as the quality of your products.
We help you in your purchase
Request quotes, know the status of an order and other general information.