Extractores de baño
Ventiladores en línea
Extractores para Cristal o Pared
VMC
Cajas de Ventilación
Ventiladores de Tejado
Recuperadores de Calor
Extractores de Cocina
Campanas y Grupos para Cocinas
Ventiladores de Confort
Tratamiento de Aire Residencial
Secamanos y Secadores de cabello
Calefacción de Instalación
Calefacción doméstica portatil
Unidades de Tratamiento de Aire
Ventiladores Helicoidales Murales
Ventiladores Helicoidales Tubulares
Ventiladores Centrífugos
Extractores Desenfumage
Ventilación de Parkings
Extractores para Atmósferas Explosivas ATEX
Cortinas de Aire
Calefacción Industrial
Rodete álabes curvados hacia atrás
Rodete álabes curvados hacia atrás de alta presión
Rodete álabes curvados hacia adelante
Rodete de álabes curvados hacia adelante (multipala)
Rodete de álabes curvados hacia atrás de doble aspiración
Rodete álabes radiales para transporte de materia
Ventiladores centrífugos para hornos
Ventiladores helicoidales
Accesorios de Montaje
Accesorios Eléctricos
Accesorios de Recuperadores
Use
These fans are particularly suitable for the removal of stale air, for ventilation, drying and for all those applications which entail moving large volumes of air at low and medium pressures.
Working temperature
- 20°C + 40°C.
Construction
Axial-flow fan, direct drive. The impeller is made of die-cast aluminium and has adjustable blades. The housing is made of welded sheet steel with inlet nozzle. For the size ≥ 1120 the fans are standard hot galvanized.
Motor
The motor is three-phase, 230/400 V, 50 Hz, B3, (other frequencies, tensions on demand).
Direction of the air
Normally supplied with the air flowing from the motor to the impeller (A), on demand the fans can be supplied with the direction from the impeller to the motor (B).
These fans are particularly suitable for the removal of stale air, for ventilation, drying and for all those applications which entail moving large volumes of air at low and medium pressures.
Working temperature
- 20°C + 40°C.
Construction
Axial-flow fan, direct drive. The impeller is made of die-cast aluminium and has adjustable blades. The housing is made of welded sheet steel with inlet nozzle. For the size ≥ 1120 the fans are standard hot galvanized.
Motor
The motor is three-phase, 230/400 V, 50 Hz, B3, (other frequencies, tensions on demand).
Direction of the air
Normally supplied with the air flowing from the motor to the impeller (A), on demand the fans can be supplied with the direction from the impeller to the motor (B).
