Extractores de baño
Ventiladores en línea
Extractores para Cristal o Pared
VMC
Cajas de Ventilación
Ventiladores de Tejado
Recuperadores de Calor
Extractores de Cocina
Campanas y Grupos para Cocinas
Ventiladores de Confort
Tratamiento de Aire Residencial
Secamanos y Secadores de cabello
Calefacción de Instalación
Calefacción doméstica portatil
Unidades de Tratamiento de Aire
Ventiladores Helicoidales Murales
Ventiladores Helicoidales Tubulares
Ventiladores Centrífugos
Extractores Desenfumage
Ventilación de Parkings
Extractores para Atmósferas Explosivas ATEX
Cortinas de Aire
Calefacción Industrial
Rodete álabes curvados hacia atrás
Rodete álabes curvados hacia atrás de alta presión
Rodete álabes curvados hacia adelante
Rodete de álabes curvados hacia adelante (multipala)
Rodete de álabes curvados hacia atrás de doble aspiración
Rodete álabes radiales para transporte de materia
Ventiladores centrífugos para hornos
Ventiladores helicoidales
Accesorios de Montaje
Accesorios Eléctricos
Accesorios de Recuperadores
Use
For room ventilation, to remove heat, smoke and stale air, it must be remembered that in order to have proper fan operation, it is necessary to replace the extracted air by introducing the same volume of air into the room.
Working temperature
- 20°C + 40°C.
Construction
Direct-drive. The fan casing consists of a ring in steel Fe 360 B, which is flanged according to DIN 24154. The impeller with air-foil blades is made of polypropylene and is locked on a die-cast duraluminium hub and axis mounted wheel. Plate parts are immersed in an electrophoretic bath and then baked at 180°C.
Motor
Three-phase motor, 230/400 V, 50 Hz, forma B5 execution. Other characteristics on demand.
Direction of the air
From motor to impeller.
For room ventilation, to remove heat, smoke and stale air, it must be remembered that in order to have proper fan operation, it is necessary to replace the extracted air by introducing the same volume of air into the room.
Working temperature
- 20°C + 40°C.
Construction
Direct-drive. The fan casing consists of a ring in steel Fe 360 B, which is flanged according to DIN 24154. The impeller with air-foil blades is made of polypropylene and is locked on a die-cast duraluminium hub and axis mounted wheel. Plate parts are immersed in an electrophoretic bath and then baked at 180°C.
Motor
Three-phase motor, 230/400 V, 50 Hz, forma B5 execution. Other characteristics on demand.
Direction of the air
From motor to impeller.
