CMPT (2) ATEX
Centrifugal Single Inlet Plastic Flame Proof Fans
CMPT (2) ATEX Series
CMPT (2) ATEX Series
Show More
Show Less
Range of single inlet direct drive centrifugal fans manufactured by injection moulding.
Antistatic polypropylene housing. Motor support and anticorrosive gaskets material providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Working temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
-Nylon (models from 14 to 25)
-Polypropylene (models 30 and 35).
-Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
ATEX Versions
ATEX versions available for 3-phase models.
For ambient working temperature -10ºC to +40ºC.
Motor IP55, Class F.
- ATEX Flameproof - Gas
![]()
II 2G Exd IIB T4
![]()
II 2G Exd IIB+H2 T4, con motor Exd IIC T4 (with motor Exd IIC T4)
To select CMPT ATEX refer to performance data, or Easyvent.
Note: electrical data may vary for ATEX motor.
ATEX versions available for 3-phase models.
For ambient working temperature -10ºC to +40ºC.
Motor IP55, Class F.
- ATEX Flameproof - Gas
To select CMPT ATEX refer to performance data, or Easyvent.
Note: electrical data may vary for ATEX motor.
Attributes
Discharge circular duct connection
For models CMPT-14, CMPT-20 and CMPT-25.
Discharge rectangular duct connection
For models CMPT-30, CMPT-35, CMPT-42 and CMPT-20A
* On request, CMPT-14, CMPT- 20 and CMPT-25 are also available with discharge rectangular duct connection.
Tough and quality design
Antistatic polypropylene housing. Screws in stainless steel.
Forward curved centrifugal impeller
High-performance antistatic polypropylene impeller with forward curved blades.
