CMPT (1) ATEX
Centrifugal Single Inlet Plastic Flame Proof Fans
CMPT (1) ATEX Series
CMPT (1) ATEX Series
Show More
Show Less
Range of single inlet direct drive centrifugal fans manufactured by injection moulding.
Antistatic polypropylene housing. Motor support and anticorrosive gaskets material providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Working temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
-Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
-Nylon (models from 14 to 25)
-Polypropylene (models 30 and 35).
-Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
Antistatic polypropylene housing. Motor support and anticorrosive gaskets material providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Working temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
-Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
-Nylon (models from 14 to 25)
-Polypropylene (models 30 and 35).
-Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
Equipped with explosion-proof motors according to the ATEX Directive for three-phase models: - Explosion-proof II2G EExdIIBT4 II 2G Exd IIB+H2 T4, with Exd IIC T4 motor (on request) To select CMPT ATEX models, check the characteristic curves
