CVST
Belt driven cabinet fans
CVST Series
CVST Series
Show More
Show Less
Range of forward curved belt drive cabinet fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked). The casings and the impeller are manufactured from galvanized sheet steel. Internally lined with 7 mm thickness of melamine thermo- acoustic insulation. All models incorporate a single inlet low pressure centrifugal fan mounted on anti-vibration mounts and flexible coupling at the discharge. Supplied as standard in horizontal discharge (code H) configuration with motor, pulley and belt assembly on the left hand side of the unit when viewed from the discharge outlet (code CW).
Motors
All motors are IP55, class F insulation.
Electrical supply:
Three phase 220-240/380-415-50/60*Hz, up to 3 kW.
(*Check EasyVent for 60Hz available models)
Three phase 380-415V-50Hz, for higher motor powers and two speed motors.
(See characteristics chart).
All motor above 3 kW are mounted onto an adjoining support frame.
All three phase motors are speed controllable by frequency inverter.
Other versions on request
The belt-driven assembly can be supplied at the right hand side of the unit (code CCW).
Vertical discharge (code V) configuration.
Two speed motors (4/8 and 4/6 poles).
Single phase motor (CVSB) up to 2,2 kW.
Motors
All motors are IP55, class F insulation.
Electrical supply:
Three phase 220-240/380-415-50/60*Hz, up to 3 kW.
(*Check EasyVent for 60Hz available models)
Three phase 380-415V-50Hz, for higher motor powers and two speed motors.
(See characteristics chart).
All motor above 3 kW are mounted onto an adjoining support frame.
All three phase motors are speed controllable by frequency inverter.
Other versions on request
The belt-driven assembly can be supplied at the right hand side of the unit (code CCW).
Vertical discharge (code V) configuration.
Two speed motors (4/8 and 4/6 poles).
Single phase motor (CVSB) up to 2,2 kW.
Attributes
Vertical discharge models
Vertical discharge models available under request.
Low noise level
Acoustic insulation of 7 mm thickness flame retardant (M1) melamine foam reducing the noise level significantly.
Flexible coupling at the discharge
To reduce vibration and noise transmissions to the installation.
Robustness
Quality finishing, with aluminium corners providing a high robustness.
Anti-vibration mounts
The fan is mounted on base frame with silent-blocks to reduce vibration and noise transmissions to the installation.
