HXM
Plate mounted axial flow fans
HXM Series
HXM Series
Show More
Show Less
The HXM plate mounted axial flow fans are manufactured from pressed galvanised steel and protected from corrosion by a beige epoxy-polyester paint finish. HXM models include impellers manufactured from aluminium sheet (HXM-200 to HXM-350) or steel sheet (HXM-400), finished with black polyester paint.
All models include a steel finger proof guard as standard mounted to the inlet side of the fan.
Motor
HXM-200 to HXM-350: Single phase speed controllable motor 230V-50/60Hz equipped with thermal protection, IP44, Class B insulation, flexible cable (lenght: 50cm) for connection to the electrical supplies and ball bearings greased for life.
HXM-400: External rotor motor, IP54, Class F insulation, fitted with thermal protection and wiring terminal box.
Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).
All models include a steel finger proof guard as standard mounted to the inlet side of the fan.
Motor
HXM-200 to HXM-350: Single phase speed controllable motor 230V-50/60Hz equipped with thermal protection, IP44, Class B insulation, flexible cable (lenght: 50cm) for connection to the electrical supplies and ball bearings greased for life.
HXM-400: External rotor motor, IP54, Class F insulation, fitted with thermal protection and wiring terminal box.
Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).
Attributes
Provided with cable for connection to the electrical supplies
Motor protected from corrosion by epoxy-polyester paint finish.
Cable to ease connection to electrical supplies (except for HXM-400 model).
HXM-400 model terminal box
Wiring terminal box including the capacitor.
