Bathroom Extract Fans
Air Handling Units
In-line Duct Fans
Heat Recovery Units
Acoustic Cabinet Fans
Roof mounted fans
Comfort Cooling Range
Hand and Hair Dryers 
Air Purifiers
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
In-line Duct Fans
Acoustic Cabinet Fans
Roof mounted fans
Atex Fans for Explosive Hazardous 
Wall or Window Extract Fans
Whole house Extract Units
Kitchen Extract Fans 
Kitchen Extract Hoods 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Construction
Direct drive. Two different constructions are available: A and B.
Construction A
Cylindrical stack with plate square base for fixing on to a horizontal base, or fitted to suit the roof pitch. The fan is galvanized, fitted with a rain hood as protection against adverse weather conditions.
Construction B
Cheaper construction without square base. The impeller is made of diecast aluminium and 5 adjustable baldes (for both constructions A + B).
Motor
The motor is three-phase, 230/400 V, 50 Hz, V6 (other frequencies, tensions on demand).
Direction of the air
The specifications listed in the tables refer to construction A. As to construction B the specifications change as follows: SPECIFICATIONS - 10%; ABSORPTION + 10%; NOISE LEVEL + 3÷4 dB/A.
N.B.: To protect the fiberglass hoods during transport, they are delivered disassembled.
Direct drive. Two different constructions are available: A and B.
Construction A
Cylindrical stack with plate square base for fixing on to a horizontal base, or fitted to suit the roof pitch. The fan is galvanized, fitted with a rain hood as protection against adverse weather conditions.
Construction B
Cheaper construction without square base. The impeller is made of diecast aluminium and 5 adjustable baldes (for both constructions A + B).
Motor
The motor is three-phase, 230/400 V, 50 Hz, V6 (other frequencies, tensions on demand).
Direction of the air
The specifications listed in the tables refer to construction A. As to construction B the specifications change as follows: SPECIFICATIONS - 10%; ABSORPTION + 10%; NOISE LEVEL + 3÷4 dB/A.
N.B.: To protect the fiberglass hoods during transport, they are delivered disassembled.
