Bathroom Extract Fans
Air Handling Units
In-line Duct Fans
Heat Recovery Units
Acoustic Cabinet Fans
Roof mounted fans
Comfort Cooling Range
Hand and Hair Dryers 
Air Purifiers
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
In-line Duct Fans
Acoustic Cabinet Fans
Roof mounted fans
Atex Fans for Explosive Hazardous 
Wall or Window Extract Fans
Whole house Extract Units
Kitchen Extract Fans 
Kitchen Extract Hoods 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Range of single inlet direct drive centrifugal fans manufactured by injection moulding.
Antistatic polypropylene housing. Motor support and anticorrosive gasket materials providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Operating temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
- Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
- Nylon (models from 14 to 25)
- Polypropylene (models 30 and 35).
- Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
Antistatic polypropylene housing. Motor support and anticorrosive gasket materials providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Operating temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
- Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
- Nylon (models from 14 to 25)
- Polypropylene (models 30 and 35).
- Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
Equipped with explosion-proof motors according to the ATEX Directive for three-phase models: - Explosion-proof II2G EExdIIBT4 II 2G Exd IIB+H2 T4, with Exd IIC T4 motor (on request) To select CMPT ATEX models, check the characteristic curves
