> Download images
  • Print this page
  • Download the catalog series in pdf


Double inlet centrifugal fans. Manufactured from steel sheet protected with cataforesis primer + epoxy paint finish. Designed to continuously circulate air from -20ºC up to 40ºC (60ºC with C3 bearings).

Assembly systems
• ARRANGEMENT 6: Impeller mounted on shaft running in bearings on each side of casing and supported by the fan casing.
ARRANGEMENT 18: Generally as arrangement 6 but with a fan and motor supported by common base frame.
• ARRANGEMENT 19: Generally as arrangement 6 but with the motor supported by the fan scroll.

2, 4 or 6 pole, IE 3* high efficiency (the rpm of each motor will be adapted according to the calculation for each drive), three-phase 230/400V 50Hz up to motor size 132 and 400/690V 50Hz for higher motors. IP55, Class F protection.
* From 0,75kW, motor can be IE 2 and controlled by VSD.

On request
• Manufactured from different materials.
• 2-speed motors.
• 60 Hz versions.
• Painted in different RAL colour.
• Inspection door, draining, weather seal on scroll and shaft access
• Thermal insulation lagging.


Versiones ATEX
Bajo pedido, versiones antiexplosivas según la Directiva ATEX para modelos trifásicos:
Para trabajar a temperaturas de -20ºC a +60ºC, presión ambiente (absoluta) de 0,8 bar hasta 1,1 bar, según EN 14986.

• Gas:
3G IIB T2-T3-T4, Motor ExnA (sólo para categoría 3G)
3G IIB+H2 T2-T3-T4, Motor ExnA (sólo para categoría 3G)


  • 61-DFM-N-TRbdp506

    Backward curved impeller

  • pdf_serie IT-EN_FE_DFM 648.15Kb

S&P by your side

For us, customer service is as important as the quality of your products.

We help you in your purchase

Request quotes, know the status of an order and other general information.

s&p by your side