Bathroom Extract Fans
Air Handling Units
In-line Duct Fans
Heat Recovery Units
Acoustic Cabinet Fans
Roof mounted fans
Comfort Cooling Range
Hand and Hair Dryers 
Air Purifiers
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
In-line Duct Fans
Acoustic Cabinet Fans
Roof mounted fans
Atex Fans for Explosive Hazardous 
Wall or Window Extract Fans
Whole house Extract Units
Kitchen Extract Fans 
Kitchen Extract Hoods 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
-
Green 'Smart Ventilation Systems' logo
-
Green 'EC Technology' logo
-
Green 'ErP OK' logo
-
Blue 'Low Profile' logo
-
Yellow 'Heat Recovery' logo
-
Grey 'Domestic MVHR Single Dwellings' logo'
-
Grey 'Domestic MVHR Multi Dwelling Blocks' logo
-
Red Install-friendly logo
MVHR unit with high efficiency counterflow heat exchanger (up to 88.2%) and low consumption EC motors.
The unit assures a continuous and balanced ventilation system, extracting stale air and at the same time introducing tempered and filtered fresh air to the building.
The optimized design allows compliance with the highest standards assuring a very low leakage level, high thermal insulation and a minimal sound level.
All units are equipped with high efficiency filters to maintain air quality. The units use G4 filters with the F7 filter as an optional extra allowing the unit to operate at 300m3/h at 100Pa. An integrated 100% bypass is activated automatically.
Plug fans with backward curved impeller and EC external rotor motor to ensure low energy consumption. Free cooling is provided by 100% by-pass during summertime. The integral controls offer Plug & Play.
- Remote RF Controller
- 3-Pin Plug for easy install
- Low consumption EC motors
- Installer friendly, with simple access to all components
The unit assures a continuous and balanced ventilation system, extracting stale air and at the same time introducing tempered and filtered fresh air to the building.
The optimized design allows compliance with the highest standards assuring a very low leakage level, high thermal insulation and a minimal sound level.
All units are equipped with high efficiency filters to maintain air quality. The units use G4 filters with the F7 filter as an optional extra allowing the unit to operate at 300m3/h at 100Pa. An integrated 100% bypass is activated automatically.
Plug fans with backward curved impeller and EC external rotor motor to ensure low energy consumption. Free cooling is provided by 100% by-pass during summertime. The integral controls offer Plug & Play.
- Remote RF Controller
- 3-Pin Plug for easy install
- Low consumption EC motors
- Installer friendly, with simple access to all components
