Bathroom Extract Fans
Air Handling Units
In-line Duct Fans
Heat Recovery Units
Acoustic Cabinet Fans
Roof mounted fans
Comfort Cooling Range
Hand and Hair Dryers 
Air Purifiers
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
In-line Duct Fans
Acoustic Cabinet Fans
Roof mounted fans
Atex Fans for Explosive Hazardous 
Wall or Window Extract Fans
Whole house Extract Units
Kitchen Extract Fans 
Kitchen Extract Hoods 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Range of in-line fans for circular ducts, designed for high aerodynamic performances with a very compact profiles and very low sound levels.
The range comprises 7 diameters and covers a flow range from 260 to 1080 m3/h.
Low profile compact casing manufactured from galvanised sheet steel. The terminal box and the mounting bracket do not increase the product’s profile.Optimised design of the impeller, guide vane and outlet diffuser, manufactured from injection moulded plastic, to increase performance and lower the sound level.
Airtight joint between the galvanised steel casing and the plastic guide vane to avoid air leaks. Rubber gaskets on the flanges to improve airtightness with the ducts. Silent block between the motor and the holder to reduce the motor’s vibrations and lower the sound level of the installation, even in terms of speed regulation. IP65 terminal box allowing outdoor installation.
Motor
Fitted with an external rotor single-phase AC motor:
- 220-240V 50/60Hz, Class F, IP 44
- Speed controllable by voltage.
- Thermal protection with manual reset.
- Working temperature: -20/60 ºC
The range comprises 7 diameters and covers a flow range from 260 to 1080 m3/h.
Low profile compact casing manufactured from galvanised sheet steel. The terminal box and the mounting bracket do not increase the product’s profile.Optimised design of the impeller, guide vane and outlet diffuser, manufactured from injection moulded plastic, to increase performance and lower the sound level.
Airtight joint between the galvanised steel casing and the plastic guide vane to avoid air leaks. Rubber gaskets on the flanges to improve airtightness with the ducts. Silent block between the motor and the holder to reduce the motor’s vibrations and lower the sound level of the installation, even in terms of speed regulation. IP65 terminal box allowing outdoor installation.
Motor
Fitted with an external rotor single-phase AC motor:
- 220-240V 50/60Hz, Class F, IP 44
- Speed controllable by voltage.
- Thermal protection with manual reset.
- Working temperature: -20/60 ºC
-
Terminal box
Built-in, IP65 terminal box that does not add to the overall height dimensions. -
Airtight joints
Rubber gaskets for a more airtight joint with the installation’s ducts. -
High performance Impeller
New impeller geometry for reduced sound levels and to offer high performance. -
Mounting bracket
Strong mounting bracket supplied with the fan. -
Two mounting positions for support
The product can be mounted in two different positions by changing the position of the support’s anchoring. -
Two mounting positions for support
The product can be mounted in two different positions by changing the position of the support’s anchoring.
