VMP / Aérateurs
VMC Simple-flux
VMC Double-flux
Traitement de l'humidité
Systèmes de Purification
Chauffage d'appoint
Entrées d'air 
Bouches
Accessoires électriques
Conduits & Accessoires Plastiques
Caisson de ventilation 
Désenfumage & Protection incendie
Conduits & Accessoires Métalliques
Ventilation tertiaire
Cuisine professionnelle
Diffusion
Chauffage
Ventilation industrielle
Hygiène
Ventilation confort
Direct drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously.
Standard arrangements
• Arrangement 4: Impeller mounted on the B3 motor shaft supported by the pedestal. Version with cooling disk up to +220°C.
• Arrangement 5: Impeller mounted on the B5 motor shaft fitted on the casing sideplate. Version with cooling disk up to +220°C.
• Arrangement 8: Flexible couplingthat connectsthe motor to the fan shaft. Version with cooling disk up to +300°C.
Motors
2 pole, IE3* high efficiency, three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
*From 75kW to 200kW, the motor will be IE4.
On request
• Manufactured from different materials.
• 60 Hz versions.
• Painted in different RAL colour.
• Hot dip galvanized static parts.
•Corrosion proof construction.
• Wear proof construction.
•Motors for special applications.
•Motors suitable for VSD.
•Accessories: Flexible joints, inspection door, casing drain, AV-mounts, protection nets, filter, silencer, inlet discharge governor, valves, dampers.
• Gas tight construction.
• Thermal insulation.
Working temperature range: -20ºC/+100ºC continuously.
Standard arrangements
• Arrangement 4: Impeller mounted on the B3 motor shaft supported by the pedestal. Version with cooling disk up to +220°C.
• Arrangement 5: Impeller mounted on the B5 motor shaft fitted on the casing sideplate. Version with cooling disk up to +220°C.
• Arrangement 8: Flexible couplingthat connectsthe motor to the fan shaft. Version with cooling disk up to +300°C.
Motors
2 pole, IE3* high efficiency, three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
*From 75kW to 200kW, the motor will be IE4.
On request
• Manufactured from different materials.
• 60 Hz versions.
• Painted in different RAL colour.
• Hot dip galvanized static parts.
•Corrosion proof construction.
• Wear proof construction.
•Motors for special applications.
•Motors suitable for VSD.
•Accessories: Flexible joints, inspection door, casing drain, AV-mounts, protection nets, filter, silencer, inlet discharge governor, valves, dampers.
• Gas tight construction.
• Thermal insulation.
Versions ATEX
Sur demande, ventilateurs version antidéflagrante conformes à la directive 2014/34/UE (directive ATEX) :
• Gaz :
2G IIB T2-T3-T4
2G IIB+H2 T2-T3-T4
3G IIB T2-T3-T4
3G IIB+H2 T2-T3-T4
• Poussières non conductrices
2D IIIB T125°C-T135°C-T195°C-T295°C
3D IIIB T125°C-T135°C-T195°C-T295°C
• Poussières conductrices (moteur IP65 obligatoire) :
Sur demande, ventilateurs version antidéflagrante conformes à la directive 2014/34/UE (directive ATEX) :
• Gaz :
2G IIB T2-T3-T42G IIB+H2 T2-T3-T43G IIB T2-T3-T43G IIB+H2 T2-T3-T4• Poussières non conductrices
2D IIIB T125°C-T135°C-T195°C-T295°C3D IIIB T125°C-T135°C-T195°C-T295°C• Poussières conductrices (moteur IP65 obligatoire) :
