Bathroom Extract Fans
Air Handling Units
In-line Duct Fans
Heat Recovery Units
Acoustic Cabinet Fans
Roof mounted fans
Comfort Cooling Range
Hand and Hair Dryers 
Air Purifiers
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
In-line Duct Fans
Acoustic Cabinet Fans
Roof mounted fans
Atex Fans for Explosive Hazardous 
Wall or Window Extract Fans
Whole house Extract Units
Kitchen Extract Fans 
Kitchen Extract Hoods 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Use
These fans are particularly suitable for the removal of air and noxious gases, and for all those applications where large volumes of air need to be moved at low and medium pressures. They are installed in foundries, joineries, and chemical industries.
Working temperature
- 20°C to + 60°C.
Construction
Axial-flow fan, belt drive. The impeller is made of die-cast aluminium and has adjustable blades. The casing is made of welded sheet steel and features a double flange. For sizes ≥ 1000, the fans are standard hot-dip galvanised.
Motor
The motor is three-phase, 230/400 V, 50 Hz, B3 (other frequencies and voltages available on request).
Direction of the air
Normally supplied with the air flowing from the support to the impeller (A); on request, the fans can be supplied with the direction from the impeller to the motor (B).
Specifications
The characteristics quoted in the tables apply to the construction without belt protection; for constructions with belt protection, the characteristics change as follows: CHARACTERISTICS: - 10%, ABSORPTION - 10%, NOISE LEVEL + 1÷2 dB/A.
These fans are particularly suitable for the removal of air and noxious gases, and for all those applications where large volumes of air need to be moved at low and medium pressures. They are installed in foundries, joineries, and chemical industries.
Working temperature
- 20°C to + 60°C.
Construction
Axial-flow fan, belt drive. The impeller is made of die-cast aluminium and has adjustable blades. The casing is made of welded sheet steel and features a double flange. For sizes ≥ 1000, the fans are standard hot-dip galvanised.
Motor
The motor is three-phase, 230/400 V, 50 Hz, B3 (other frequencies and voltages available on request).
Direction of the air
Normally supplied with the air flowing from the support to the impeller (A); on request, the fans can be supplied with the direction from the impeller to the motor (B).
Specifications
The characteristics quoted in the tables apply to the construction without belt protection; for constructions with belt protection, the characteristics change as follows: CHARACTERISTICS: - 10%, ABSORPTION - 10%, NOISE LEVEL + 1÷2 dB/A.
