Bathroom Extract Fans
Air Handling Units
In-line Duct Fans
Heat Recovery Units
Acoustic Cabinet Fans
Roof mounted fans
Comfort Cooling Range
Hand and Hair Dryers 
Air Purifiers
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
In-line Duct Fans
Acoustic Cabinet Fans
Roof mounted fans
Atex Fans for Explosive Hazardous 
Wall or Window Extract Fans
Whole house Extract Units
Kitchen Extract Fans 
Kitchen Extract Hoods 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
-
Versions
-
New direct-drive acoustic ventilation units with improvements in airtightness, robustness, ease of assembly and repairability. Ventilation units with low noise levels, made from aluminium profiles and sandwich-type panels, with non-flammable (M0) 25 mm thick glass fibre acoustic insulation, backward-curved centrifugal impeller and dynamically balanced. Installation possible in any mounting position. Standard configuration with inline airflow but with outlet configurable as required.
Motors
CVAB-N
Single-phase motors 230V±10%, 50/60Hz,
IP55, Class F, thermal protector and
voltage adjustable. Operating temperature
-40ºC to 60ºC.
CVAT-N
Three-phase motors 400V±10% 50/60Hz, IP55,
Class F and frequency adjustable.
Thermal protector (TP) except for
models 710 and 800 which use PTC type.
PTC option available on other models upon request.
Operating temperature -40ºC to 60ºC.
Motors
CVAB-N
Single-phase motors 230V±10%, 50/60Hz,
IP55, Class F, thermal protector and
voltage adjustable. Operating temperature
-40ºC to 60ºC.
CVAT-N
Three-phase motors 400V±10% 50/60Hz, IP55,
Class F and frequency adjustable.
Thermal protector (TP) except for
models 710 and 800 which use PTC type.
PTC option available on other models upon request.
Operating temperature -40ºC to 60ºC.
On request, explosion proof versions in accordance to ATEX Directive, for three phase models.
Working temperature from -20ºC to +40ºC.
Note electrical data may vary for ATEX motors.
Working temperature from -20ºC to +40ºC.
- ATEX Flameproof - Gas:
In standard ATEX version flameproof motors are without thermal protection.
If used with frequency inverter,flameproof motors with a PTC-type thermal protection must be specified at order.
II 2G Exd IIB T4 II 2G Exd IIB+H2 T4 (with motor Exd IIC T4) - ATEX Increased safety - Gas:
II 2G Exe IIC T3
Note electrical data may vary for ATEX motors.
-
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced. -
Low noise level
On request, double thickness side panels lined with 25 thickness of fireproof fiberglass acoustic insulation. -
Robustness
Quality finished aluminium profiles and plastic corners providing a great robustness. -
IP55 external terminal box
To facilitate electric connection. -
